Phone 800-517-8431
HOME > FLUKE > PORTABLE-OSCILLOSCOPES > 40MHZ-2-CH-INDUSTRIAL-SCOPEMETER-OSCILLOSCOPE-124BNA

Fluke 124B/NA

40 MHz, 2-Channel, 40 MS/s Industrial ScopeMeter Hand-Held Oscilloscope

Brand: Fluke
Model No: 124B/NA
MPN: 4755746
Our Model No: 124BNA
Condition: NEW
PDF Document Icon Data Sheet (2.28 MB)
124B/NA

$1,999.99

Add to Cart
Request a Quote

Product Features:

  • Bandwidth: 40 MHz
  • Dual-input digital oscilloscope and multimeter
  • Two, 5,000-count True-RMS digital multimeters
  • Connect-and-View trigger simplicity for hands-off operation
  • IntellaSet technology automatically and intelligently adjusts numerical readout based on measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms, up to 10 KHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements: W, VA, VAR, PF, DPF, Hz
  • Voltage, current and power harmonics
  • Check industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by test sequences for routine maintenance, or for oft used test procedures
  • External, optically isolated USB interface to transfer, archive and analyze scope or meter data
  • FlukeView ScopeMeter Software for Windows
  • Rugged design to withstand 3g vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Safety rated for CAT IV 600V
  • Li-Ion rechargeable battery for seven-hour operation (with four-hour charge time)

The Fluke 124B/NA 2-Channel Industrial ScopeMeter Hand-Held Oscilloscope, 40 MHz, 40 MS/s is the rugged oscilloscope solution for industrial electrical and electro-mechanical equipment troubleshooting and maintenance applications. It is a truly integrated test tool with oscilloscope, multimeter and high-speed recorder in one, easy-to-use instrument. The 124B/NA also integrates with Fluke Connect mobile app and FlukeView for ScopeMeter software to enable further collaboration, data analysis and archiving of critical test information.

The 124B/NA includes innovative functions designed to help technicians troubleshoot faster and get the answers they need to keep their systems up and running. Display waveforms with Connect and View trigger and setup technology and automatically view related numerical measurements using Fluke IntellaSet technology, all without making manual measurement adjustments. With Recorder Event Detect capabilities, elusive intermittent events are captured and logged for easy viewing and analysis.


Connect-and-View Triggering with Auto Reading Click for larger image

Connect-and-View triggering with Auto Reading

Connect-and-View Triggering for Instant, Stable Display

Oscilloscope users know how difficult triggering can be. Using the wrong settings can lead to unstable waveform captures, and sometimes the wrong measurement data. Fluke's unique Connect-and-View triggering technology recognizes signal patterns, and automatically sets up the correct triggering to provide a stable, reliable and repeatable display. Connect-and-View triggering is designed to work with virtually any signal, including motor drives and control signals, without adjusting parameters, or even touching a button. Signal changes are instantly recognized and settings are automatically adjusted, providing a stable display even when measuring multiple test points in quick succession.

IntellaSet/AutoReading

The Auto Readings function with Fluke IntellaSet technology uses proprietary algorithms to intelligently analyze the measured waveform and automatically displays the most appropriate numerical measurements on screen, so you can get the data you need easier than ever before. As an example, when the measured waveform is a line voltage signal, the Vrms and Hz readings are automatically displayed, whereas if the measured waveform is a square wave, the Vpeak-peak and Hz readings are automatically displayed. Using IntellaSet technology in conjunction with Connectand-View automatic triggering you can be sure that you are seeing not only the correct waveform, but the appropriate numerical reading as well - all without touching a button.


Easily obtain key power characteristics to validate system power Click for larger image

Validate System Power

Industrial Equipment Needs Reliable Power Supply

To operate properly, use the dual input to obtain key power measurements. For single phase or 3-phase balanced systems, the dual inputs of the 124B/NA can measure AC+DC RMS voltage on channel A and AC+DC RMS current on channel B.

Harmonic spectrum overview with cursors to measure distortion as percentage of fundamental Click for larger image

Harmonic Spectrum

Harmonics Measurements

Harmonics are periodic distortions of voltage, current, or power sine waves. Harmonics in power distribution systems are often caused by non-linear loads such as switched mode DC power supplies and adjustable speed motor drives. Harmonics can cause transformers, conductors, and motors to overheat. In the Harmonics function, the Test Tool measures harmonics to the 51st. Related data such as DC components, THD (Total Harmonic Distortion), and K factor are measured to provide a complete insight into the electrical state of health of your loads.

Single test tool measures volts, ohms, amps or capacitance, in addition to displaying waveforms Click for larger image

One Test Tool

One Test Lead to Measure Multiple Electrical Parameters

High frequency waveform, meter, capacitance and resistance measurements as well as continuity checks are all covered by a single set of shielded test leads. No time is wasted finding or swapping leads.

Fluke Connect Mobile App Compatibility

Automated industrial machinery is harder than ever to trouble shoot. It is not enough to just know where you have to test, you also have to know what to look for - and that can be difficult without baseline measurement data or access to subject matter experts. The Fluke Connect Assets wireless system of software and wireless test tools enables technicians to reduce maintenance costs and increase uptime with accurate equipment records and maintenance data that is easy to interpret and share. Compare and contrast test point measurement data and trends so that you can better understand signal characteristics and changes over time. And, by storing maintenance data on the Fluke Cloud you can enable team members to access it from wherever and whenever they need to, so that you can get advice or approvals in the field.


Quickly step through recorded events to identify and troubleshoot intermittent faults Click for larger image

Troubleshoot Intermittent Faults

Use Comprehensive Recorder Modes to Help Find Intermittent Faults

The toughest faults to find are those that happen only once in a while. These intermittent events can be caused by bad connections, dust, dirt, corrosion or simply broken wiring or connectors. Other factors, like line outages and sags or the starting and stopping of a motor can also cause intermittent events, resulting in equipment shutdowns. When these events happen, you may not be around to see it, but the 124B/NA will. You can either plot the minimum and maximum peak measurement values or record the waveform trace. And with expandable micro SD memory, recording sessions can be done for up to 14 days. This recorder is even more powerful with the addition of Recorder Event Detect, which makes detecting and logging intermittent faults easier than ever. Just set a threshold on a meter reading or scope trace and deviations are tagged as unique events. You no longer need to search through masses of data to pinpoint faults. You can quickly step from one tagged event to the next, while still having access to the full data set.

Quickly understand industrial field bus signal physical layer analog characteristics Click for larger image

Industrial Field Bus

Industrial Bus Health Test Verifies Electrical Signal Quality on Industrial Buses

Bus Health Test analyzes the electrical signals on the industrial bus or network, giving you a clear "Good", "Weak" or "Bad" indication mark for each of the relevant parameters, which is presented next to the actual measurement value. Measured values are compared to standard values, based on the selected bus types (CAN-bus, Profi-bus, Foundation Field, RS-232 and many more), or unique reference values can be set, if different tolerances are required.

  • 1 - 10:1 Voltage Probe
  • 1 - Shielded Test Lead Set with Ground Leads (Black)
  • 1 - Test Lead Set for Grounding (Black)
  • 1 - Hook Clip Set (Red and Blue)
  • 1 - Banana-to-BNC Adapter (Black)
  • 1 - Rechargeable Li-ion Battery Pack
  • 1 - Switch Mode Power Supply with Adapter/Battery Charger
  • 1 - USB Angled Adapter
  • 1 - Soft Carrying Case
  • 1 - Magnetic Hanger
  • 1 - FlukeView ScopeMeter Software
  • 1 - Screen Protector
  • 1 - User Manual
Adapters
Model Description Buy Now Price
BB120 Fluke BB120 Female BNC Adapter-to-Shielded Banana Jack for 120 Series Add to Cart
($39.99)
Sale $32.39

Only 1 left in stock
BHT190 Fluke BHT190 Bus Health Test Break-Out Adapter Set for 120 Series Add to Cart
($599.99)
Sale $539.99
I200S Fluke I200S AC Current Clamp/BNC, 0.5A-240A AC Switchable Add to Cart
($249.99)
Sale $224.99

Only 1 left in stock
I30S Fluke I30S AC/DC Current Clamp/BNC, 30mA-20Arms AC/30mA-30A DC Add to Cart
($624.99)
Sale $562.49

Only 2 left in stock
Cables
Model Description Buy Now Price
OC4USB Fluke OC4USB USB Interface Cable for Models 43 and 43B, and 120, 190 and 430 Series Add to Cart
($199.99)
Sale $161.95

Only 5 left in stock
Carrying Cases
Model Description Buy Now Price
C120B Fluke C120B Soft Carrying Case with Zipper for 120B Series Add to Cart

$129.99

C120 Fluke C120 Hard Carrying Case with Storage Compartments for Models 43 and 43B, and 120 Series Add to Cart
($129.99)
Sale $114.39
Current Clamps
Model Description Buy Now Price
I1000S Fluke I1000S AC Current Clamp/BNC, 100mA-1000A AC Switchable Add to Cart
($574.99)
Sale $517.49

Only 1 left in stock
I400S Fluke I400S AC Current Clamp/BNC, 0.5A-4000A AC Switchable Add to Cart
($289.99)
Sale $260.99

Only 2 left in stock
I410 Fluke I410 AC/DC Current Clamp/Banana Plugs, 1A-400A AC/DC Add to Cart
($269.99)
Sale $242.99
I5S Fluke I5S AC Current Clamp/BNC, 10mA-5A AC Add to Cart
($574.99)
Sale $517.49

Only 3 left in stock
Modules
Model Description Buy Now Price
80TK Fluke 80TK Thermocouple Module, Type K Add to Cart
($151.99)
Sale $122.95

Only 8 left in stock
PV350 Fluke PV350 Pressure Vacuum Module Add to Cart
($479.99)
Sale $431.99

Only 7 left in stock
Power Supply
Model Description Buy Now Price
BP120MH Fluke BP120MH Battery Pack for Models 43 and 43B and 120 Series Add to Cart
($129.99)
Sale $114.39

Only 4 left in stock
PM8907/808 Fluke PM8907/808 Universal Power Adapter and Charger, Switchable Add to Cart
($129.99)
Sale $114.39

Only 2 left in stock
PM9091/001 Fluke PM9091/001 Coaxial Male BNC Cables for 120 Series, 50 Ohm, 5 ft. (Red, Black and Gray) Add to Cart
($99.99)
Sale $87.99
PM8907/813 Fluke PM8907/813 Line Voltage Power Adapter/Charger for Models 43 and 43B, and 90 and 120 Series Add to Cart
($99.99)
Sale $79.99

Only 6 left in stock
Replacement Parts
Model Description Buy Now Price
RS120-III Fluke RS120-III Replacement Accessories Kit for Models STL120-III and VPS40-III Add to Cart
($129.99)
Sale $114.39
Software
Model Description Buy Now Price
SCC120E Fluke SCC120E Software, Cable and Carrying Case Value Kit for 120 Series Add to Cart
($449.99)
Sale $404.99

Only 1 left in stock
Test Leads, Probes and Clips
Model Description Buy Now Price
80PK-22 Fluke 80PK-22 SureGrip Immersion Temperature Probe, Type-K Thermocouple, -40 to 1090°C Add to Cart
($101.99)
Sale $82.61

Only 3 left in stock
80PK-24 Fluke 80PK-24 SureGrip Air Temperature Probe, Type-K Thermocouple, -40 to 816°C Add to Cart
($121.99)
Sale $104.91

Only 10 left in stock
80PK-26 Fluke 80PK-26 SureGrip Tapered Temperature Probe, Type-K Thermocouple, -40 to 816°C Add to Cart
($121.99)
Sale $104.91

Only 4 left in stock
80PK-3A Fluke 80PK-3A Surface Probe, Type K Add to Cart
($161.99)
Sale $130.95

Only 3 left in stock
80PK-8 Fluke 80PK-8 Pipe Clamp Temperature Probe, Type-K Thermocouple,-29 to 149°C Add to Cart
($181.99)
Sale $152.63

Only 10 left in stock
AC87 Fluke AC87 Heavy Duty Bus Bar Clips (Red and Black) Add to Cart
($45.99)
Sale $35.95
HC120 Fluke HC120 Hook Clips for 120 Series (Red and Gray) Add to Cart
($44.99)
Sale $34.95
HC200 Fluke HC200 Hook Clips for Models VPS100, VPS101 and VPS121 and VPS200 Series (Red and Gray, 2 Sets) Add to Cart
($44.99)
Sale $34.95
L210 Fluke L210 Probe Light Kit with Probe Light and Two Probe Extenders Add to Cart
($45.99)
Sale $35.95

Only 7 left in stock
STL120-III Fluke STL120-III Shielded Test Leads for 120 Series (Red and Gray) Add to Cart
($149.99)
Sale $128.29

Only 2 left in stock
STL90 Fluke STL90 Industrial Shielded Test Lead Set (Red, Black and Gray) Add to Cart
($249.99)
Sale $224.99

Only 1 left in stock
TL221 Fluke TL221 SureGrip Test Lead Extension Kit (Red and Black) Add to Cart
($30.99)
Sale $27.27

Only 2 left in stock
TL224 Fluke TL224 SureGrip Insulated Test Leads (Red and Black) Add to Cart
($30.99)
Sale $25.10

10+ units in stock
TL220 Fluke TL220 SureGrip Industrial Test Lead Set Add to Cart
($81.99)
Sale $66.41

10+ units in stock
TL81A Fluke TL81A Deluxe Electronic Test Lead Kit Add to Cart
($154.99)
Sale $124.95

10+ units in stock
TP920 Fluke TP920 Test Probe Kit for Models TL71 and TL75 (Red and Black) Add to Cart
($40.99)
Sale $32.79

Only 2 left in stock
TL40 Fluke TL40 Retractable Tip Test Lead Set (Red and Black) Add to Cart
($45.99)
Sale $35.95

10+ units in stock
TAS90 Fluke TAS90 Shielded Test Lead Accessory Kit Add to Cart
($79.99)
Sale $63.95

Only 1 left in stock
TL71 Fluke TL71 Premium Test Lead Set (Red and Black) Add to Cart
($30.99)
Sale $25.10

10+ units in stock
TL910 Fluke TL910 Electronic Test Leads/Probes (Red and Black) Add to Cart
($71.99)
Sale $55.43

Only 4 left in stock
VPS40-III Fluke VPS40-III Safety-Designed Shrouded Voltage Probe for 120 Series, 40 MHz Add to Cart
($149.99)
Sale $120.95
Fluke 120B Series Industrial ScopeMeter® Handheld Oscilloscope Overview
Fluke 120B Series Industrial ScopeMeter
Handheld Oscilloscope Overview
Data Sheet: PDF Document Icon (2.28 MB)
Manual: PDF Document Icon (4.39 MB)
↑ Back to Top