HOME > FLUKE > IR-WINDOWS > 075-CLV fluke logo

Fluke 075-CLV
CLV Infrared Window for indoor low-voltage applications
See: 075-CLKT
MFR ID: 3460387

Click here for a larger image of the Fluke Ti27 240x180 IR resolution, 60 Hz Industrial-Commercial Thermal Imager
Fluke 075-CLV Shown

Product Information
Datasheet 1.28 MB PDF Datasheet
PDF HelpPDF Help
  • Industry’s first and only IR Window tested to UL1558 Low Voltage Switchgear Standard
  • Certified by UL as suitable for Type 1 (Indoor) environment in North America, these windows are tested to withstand the long term aging effects of UV exposure
  • The Fluke CLIRVU coating—exclusive to Fluke Windows—seals the optic prior to assembly to protect against moisture degradation
  • For use on enclosures up to 600 V
  • Identification plate attached for unique, onsite numbering for rapid location confirmation and faster repairs.
  • Each infrared window comes complete with a security access key, installation instructions and self-adhesive drilling template
  • The Fluke 075 CLV IR Window from Fluke incorporates the Quadraband optic, allowing you to perform multiple inspections using just one IR Window.
    • Visual
    • Mid-wave infrared
    • Long-wave infrared
    • Ultraviolet and corona

Low voltage does not mean low danger. The Fluke 075-CLV CLV Infrared Window for indoor low-voltage applications provides a heightened level of arc flash protection during IR inspections of low voltage equipment up to 600 V.

Increase the safety and speed of electrical thermography the Fluke 075-CLV
Inspect your indoor switchgear safely with the Fluke 075-CLV CLV Infrared Window for indoor low-voltage applications, the latest IR Window from Fluke. If you are concerned about arc-flash or electrocution risk, the Fluke 075CLV Fluke IR Window can help increase the safety of your personnel and reduce the cost of predictive maintenance, in compliance with indoor switchgear codes.

Quadraband Optic TechnologyDo you have an infrared camera with IR fusion capability? Do you simply want to take a digital photograph of a problem to help with a repair? Using pre-shot digital pictures of switchgear attached to outdoor panels is never a long term, robust solution. With C-Range Quadraband optics you can use the same IR Window to confirm a disconnect position, clarify a phase color in a multi-cable feeder or even visually detect discoloration as further confirmation of a problem.
Why is available area important?
Understanding the difference between "Optic Diameter" and "Available Area" gives the thermographer a measure of how much infrared energy is passing through the window. The more energy, the better the reading. Using a crystal IR Window means that the entire area is available for infrared transmission for optimum repeatability and results. While a mesh grid may have a larger "Optic Diameter" the grid itself blocks the IR signal, meaning that the amount of radiation available to the camera is significantly reduced and the signal may be irregular.
Fluke 075-CLV Specifications: Safety Ratings
Underwriters Laboratories (UL) recognized
UL50 environmental Type 1
UL746C Yes
UL94 Yes
UL1558 Yes
Fluke 075-CLV Specifications: General
Crystal insert size  75 mm (2.96 in)
Viewing aperture diameter 68 mm (2.7 in)
Viewing aperture area 3632 mm2 (5.63 sq in)
Thickness 2 mm (0.08 in)
Shortwave IR, Midwave IR,
Longwave IR, Ultraviolet (UV)
Visual and fusion capable Yes
Maximum temperature Gaskets: 250°C (482°F)
Body: 200°C (392°F)
Optic: 1400°C (2552°F)
Gaskets Low smoke and fume (LSF) compliant silicone
IP rating IP65
Warranty Lifetime replacement against manufacturing defects
Ordering Information
Model Description Buy Online Price
MFR ID: 3460609
Fluke 075-CLV 3" CLV Infrared Window for indoor low-voltage applications Discontinued
See: 075-CLKT
MFR ID: 3460387
Included Accessories
  • 1 - Installation CD
  • 1 - Self-adhesive drilling template
  • 1 - Security access key
  • 1 - Warranty statement