|HOME > FLUKE > DMM > FLKVIEWFRMSSFTWARE|
FlukeView Forms supports the following meters:
Fluke FlukeView Forms Shown
To address the increasing demands for reporting and documentation, Fluke presents FlukeView Forms documenting software. FlukeView Forms increases the power of your Fluke Digital Multimeter, Thermometer and ProcessMeter by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents.
With FlukeView Forms documenting software, the logging capabilities of handheld test equipment can be used to solve tough problems. For example, leave a Fluke 189 meter in place to log up to 995 readings. Then download the readings into FlukeView Forms to spot trends and document interruptions and spikes. Professionals can instantly review and compare data from up to 8 different meters on the same document - providing analysis capabilities that a meter alone can't provide.
And it's easy to use. FlukeView Forms comes with standard analysis and reporting forms. These forms can be customized for your specific analysis and reporting needs, or modified for easy use by less experienced staff. And information stored in Fluke's software can be ported to other common programs.
With the Fluke 180 Series (except the Fluke 187), you don't have to have the meter and computer running together to take your measurements. These meters can measure and store hundreds of readings to the meter's internal memory, and then later download the information to FlukeView Forms when you connect to your computer.
FlukeView Forms also logs events to make analyzing your data easier. This unique method of data recording provides more detailed readings when the input signal changes significantly. The amount of signal change that will trigger an event can be adjusted to fit your specific test situation. The minimum, maximum and average of readings are recorded for each event. Logging sessions can also be configured so that data will be recorded over specific intervals (e.g., every 5 minutes or 30 seconds).
The Fluke 189 log both events and interval data internally. For these DMMs, FlukeView Forms is the only way to extract and view the detailed min/max and event data from the meter's memory. And FlukeView Forms is the only way to change the 189's event threshold from the default of 4%. This makes FlukeView Forms an essential tool for any Fluke 189 owner!
FlukeView Forms communicates with supported meters via an infrared (Ir) serial interface, that makes data transfer fast and easy. FlukeView Forms is meter aware so there aren't any configuration problems. Using the supplied IR serial cable, the software will automatically recognize your meter and transfer the data.
Maximize the power of your Fluke Digital Multimeter with FlukeView Forms Documenting Software.
Operating System Requirements:
Minimum Recommended PC Hardware:
||Fluke FVF-SC2 Fluke View Forms Software w/USB Cable for 280 Series, 53/54-IIB, 789, 1550B, 1653||Sale $224.99
||Fluke FVF-SC3 Fluke View Forms Software w/USB Cable for 45 DMM||Sale $242.99
||Fluke FVF-SC5 Fluke View Forms Software - Basic for 8845/8846||Sale $116.19
||Fluke FVF-UG Fluke View Forms Software Upgrade||Sale $114.39
||Fluke 287/FVF True-RMS Electronic Logging Multimeter Combo Kit with FlukeView Forms||Sale $584.99
||Fluke 289/FVF True-RMS Industrial Logging Multimeter Combo Kit with FlukeView Forms||Sale $629.99