This site uses cookies to provide an optimized shopping experience. By using this site, you agree the use of cookies within our privacy policy.
Fluke 87V/PRV240
True-RMS Industrial Digital Multimeter with Compact Portable Safety Proving Unit Combo Kit
87VPRV240
87V/PRV240
4636967
Fluke 87V/PRV240
True-RMS Industrial Digital Multimeter with Compact Portable Safety Proving Unit Combo Kit
87VPRV240
87V/PRV240
4636967
The Fluke 87V/PRV240 is a kit that features Fluke's 87V True-RMS Industrial Digital Multimeter and Fluke's PRV240 Compact Portable Safety Proving Unit.
- 87V MAX: IP 67 waterproof and dustproof; operating temperature range 5 - 131°F and 95% humidity; measure up to 1000V, up to 10A AC/DC; 10,000μF capacitance; frequency to 200 kHz; AC voltage bandwidth 15 Hz - 20 kHz
- PRV240: Reduces risk of shock/arc flash; sources AC/DC steady-state voltage; 240VAC/DC output voltage
87-V
- True-RMS Industrial AC/DC Digital Multimeter, 1000VAC/DC with Temperature
- True-RMS AC voltage and current for accurate measurements on non linear signals
- Backlit keypad buttons
- Large, 2-level, bright white, backlit display
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
- Selectable filter for accurate voltage and frequency measurements on motor drives
- 0.05% DC accuracy
- 6000 counts, 3-3/4 digits
- 4-1/2 digit mode for precise measurements (20,000 counts)
- Measure up to 1000 VAC and DC
- Measure up to 10 A, 20 A for up to 30 seconds
- Built in thermometer lets you carry one less tool (TC probe included)
- Frequency to 200 kHz and % duty cycle
- Resistance, continuity and diode test
- 10,000 µF capacitance range for components and motor caps
- Min/Max-Average recording with Min/Max Alert to capture variations automatically
- Peak capture to record transients as fast as 250 µs
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch Hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bargraph for fast changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without breaking the calibration seal
- "Classic" design with new removable holster with built in test lead and probe storage
PRV240
- Compact Portable Safety Proving Unit
- Reduces risk of shock and arc flash
- Sources both AC and DC steady-state voltage
- Output voltage: 240V AC/DC
- Single LED indicates functionality
- Simple-to-use solution for complying with TBT verification
- Compatible with both high impedance or low impedance multimeters, clamp meters and two pole testers
- Voltage sourced through activated, recessed contacts to avoid accidental contact
- Battery life: 5,000 tests per set of four AA batteries
- Safety ratings: IEC61010-1, IEC61010-2-030
The Fluke 87VPRV240 True-RMS Industrial Digital Multimeter with Compact Portable Safety Proving Unit Combo Kit is the right choice, when productivity is on the line and you need to solve problems fast. This instrument delivers the accuracy and advanced troubleshooting capabilities you need. Designed specifically to handle complex signals, the 87V allows you to gain productivity by taking the guesswork out of drive system troubleshooting, even in loud, high energy, and high altitude locations.
The Fluke PRV240 Compact Portable Safety Proving Unit is a pocket-sized, battery-powered voltage source. It is unique in that it sources stable AC and DC voltages for both LoZ and HiZ instruments.
Designed for Safety and Compliance
The PRV240 provides a safe method to verify that electrical test tools are operating properly before you conduct live tests. The concept of "Test Before Touch" (TBT) involves testing your meter against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.
Verify your test tool without unnecessary exposure to shock and arc flash. The PRV240 reduces the need for personal protective equipment (PPE) when a known voltage source is not available for tester or multimeter verification, before TBT are performed. Note: PPE is still needed for absence of voltage testing, whenever it is appropriate.
| Country of Origin | Taiwan |
|---|---|
| Brand | Fluke |
| Catalog | 4636967 |
| Condition | NEW |
| UPC | 095969786614 |
| Vendor Alias | FLUKE-87V/PRV240 |
- 1 - True-RMS Industrial AC/DC Digital Multimeter, 1000VAC/DC with Temperature (87-V)
- 1 - Compact Portable Safety Proving Unit (PRV240)
- 1 - Test Lead Set (TL75)
- 1 - Temperature Probe (80BK-A)
- 1 - Alligator Clip Set (AC175)
- 1 - ToolPak Magnetic Hanging Kit (TPAK)
- 4 - AA Batteries
- 1 - 9V Battery
Customers Also Bought
Fluke 80AK-A Thermocouple Adapter, Type K
$45.95 Price $48.99
Fluke C101 Hard Carrying Case with Configurable Foam Inserts
$102.75 Price $109.99
Fluke TPAK ToolPak Magnetic Hanging Kit
$45.95 Price $54.99
