This site uses cookies to provide an optimized shopping experience. By using this site, you agree the use of cookies within our privacy policy.
Fluke 771
Milliamp Process Clamp Meter, 4-20 mA
The Fluke 771 is a Milliamp Process Clamp Meter that removes the need to lift a wire from a terminal to measure 4-20 mA, impacting maintenance time. There is no need to call a control room to override the control of a process loop; it can save time when testing analog I/O on a PLC if there is no need to check measurements on a console.
- Measure mA signals for PLC and control system analog I/O
- Measure 4 - 20 mA output signals from transmitters without breaking loop
- Measure mA signals for PLC and control system analog I/O
- Measure 4 to 20 mA output signals from transmitters without breaking loop
- 0.2 % accuracy
- Resolution and sensitivity to 0.01mA
- Hold function captures and displays changing measurements
- Dual backlit display with both mA measurement and percent of 4 to 20 mA span
- Illuminates hard to see wires in dark enclosures
- Detachable clamp with extension cable for measurements in tight locations
- Measure 10 to 50mA signals in older control systems using the 99.9mA range
- Automatic power off after 15 minutes and 2 minute automatic off for backlight and spotlight
The Fluke 771 Milliamp Process Clamp Meter, 4-20 mA removes the need to lift a wire from a terminal (break the loop) to measure 4-20 mA, which has a direct impact on your maintenance time. With the 771, there is no need to call a control room to override the control of a process loop; it can save you time when testing analog I/O on a PLC if you do not need to check measurements on a console. In addition, the 771 can impact your overall cost by eliminating catastrophic plant outage caused by accidentally opening a critical loop.
Country of Origin | China |
---|---|
Brand | Fluke |
Catalog | 2646347 |
Condition | NEW |
UPC | 095969349697 |
Vendor Alias | FLUKE-771 |
- 2 - AA Batteries
- 1 - Soft Carrying Case
- 1 - User Manual