Fluke 789
ProcessMeter

24 V Loop power supply
HART mode setting with loop power (adds 250 ohm resistor)
100 % larger dual display
1,200 ohm drive capability on mA source
Enhanced backlight with two brightness settings
0-100 % mA Span Check buttons to toggle between 4 and 20 mA
Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1 (available Feb. 2003)
Externally accessible fuses for easy replacement
DMM designed to meet 1000 volt IEC 1010 CAT III standards
Precision 1000 V, 440 mA true-rms digital multimeter
Frequency measurement to 20 kHz
Min/Max/Average/Hold/Relative modes
Diode Test and Continuity Beeper
Simultaneous mA and % of scale readout
20 mA dc current source / loop calibrator / simulator
Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp
Externally accessible battery for easy battery changes

Fluke 789 Shown

Product Information
Selection Guide	1.7 MB
Manual	825 KB
Virtual Demo	Flash
PDF Help

Fluke combined a loop calibrator and a DMM to give process technicians double the power in one tool (the Fluke 787). Now we made it even better – the ultimate loop calibration multimeter – the Fluke 789 ProcessMeter. The 789 has a display that's not only twice as large, but also twice as bright with two levels of backlighting. With its built–in, selectable 250 ohm HART^® resistor, it eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.

Ordering Information
Model	Description	Buy Online	Price
789	Fluke 789 Process Meter		$795.00
Included Accessories
	1 - TL71 Premium Test Lead Set 1 - C72 Alligator Clips 1 - Four AA alkaline batteries (installed) 1 - Users Manual and Quick Reference Guide	Included
Optional Accessories
Cases and Holsters
C25	Fluke C25 Large Soft Case for most DMMs with Holsters		$28.63
TPAK	Fluke TPAK Meter Hanging Kit		$30.64
C100	Fluke C100 Universal Hard Carrying Case		$39.66
LPAK804	Fluke LPAK804 LockPak		$24.25
Current Clamps
i400	Fluke i400 400 Amp AC Current Clamp, Banana Plugs for DMMs		$112.42
I1010	Fluke I1010 ACDC Current Clamp		$292.42
I410	Fluke i410 AC/DC 400 Amp Current Clamp		$179.89
771	Fluke 771 Milliamp Process Clamp Meters - Special Price!		$387.96 (Reg. $449.00)
Fiber Optic
FOM	Fluke FOM Fiber Optic Power Meter		$397.17
High Voltage Probes
80K40	Fluke 80K-40 High Voltage Probe		$155.94
80K6	Fluke 80K-6 High Voltage Probe		$89.10
Pressure and Vacuum
PV350	Fluke PV350 Digital Pressure Vacuum Module		$335.78
Software
FVFSC2	Fluke FVF-SC2 FlukeView Forms Software		$172.94
Temperature
80T150U	Fluke 80T-150U Universal Temperature Probe		$179.89
80TK	Fluke 80TK Thermocouple Conversion Module		$101.16
Test Leads, Probes and Clips
TL28A	Fluke TL28A Alligator Clip Test Lead Set		$35.64
TL220	Fluke TL220 Suregrip+ Electrical Test Lead Set		$54.59
85RF	Fluke 85RF High Frequency Probe		$178.18
AC220	Fluke AC220 SureGrip Alligator Clips		$27.80
AC280	Fluke AC280 SureGrip Hook Clips		$24.45
TL222	Fluke TL222 Suregrip+ Silicone Right Angle Test Lead Set		$21.12
TL40	Fluke TL40 Retractable Tip Test Lead Set		$32.25
TL224	Fluke TL224 Suregrip+ Silicone Test Leads		$21.12
TL26A	Fluke TL26A 5-way Test Lead Set		$41.41
TP220	Fluke TP220 Suregrip+ Test Probes		$13.34