Fluke 787
ProcessMeter™

Fluke 787 Shown   Product Information Manual 593 KB DMM Terms HTML Ordering Info PDF Help

• DMM and loop calibrator in one tool
• Precision 1000V, 440 mA digital multimeter
• Measure ac and dc volts, ac and dc current, resistance, continuity, and frequency
• 0.1% dc voltage accuracy
• 0.05% dc current accuracy, 1 A resolution to 30 mA
• Simultaneous mA and % of scale readout
• True rms ac voltage measurement to 1 kHz
• Frequency measurement to 20 kHz
• Min/Max/Average/TouchHold/Relative modes
• Diode test and continuity beeper
• DC current source/loop calibrator
• 20 mA current source/simulator
• Simultaneous mA and % of scale readout
• Manual step (25%, coarse, fine) plus auto step and auto ramp
• Clear LCD with backlight; 4,000 counts (30,000 counts for dc current)
• Externally accessible battery for easy battery changes
• 1000V overload protection on V, ohms, frequency
• 150V overload protection on mA, backed-up by 440 mA 1000V fuse
• Designed to meet 1000 volt IEC 1010 Cat III standards

A maintenance and calibration tool that will be at home in every instrumentation technician's tool box, the Fluke 787 ProcessMeter combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on the trusted Fluke 87 DMM, the 787 adds the ability to measure, source, and simulate dc loop current with 0.05% accuracy and 1 microamp resolution. The 787 offers:

• Simultaneous mA and % of scale readout on mA output.
• 25% Manual Step plus Auto Step and Auto Ramp on mA output.
• Clear LCD with backlight; 4,000 counts (30,000 counts for dc current).
• Min/Max/Average/Hold/Relative modes.
• Externally accessible battery for easy battery changes.
• 1000V overload protection on V, ohms, frequency.
• 150V overload protection on mA, backed up by 440 mA 1000V fuse.