HOME > FLUKE > CALIBRATORS > 709H fluke logo

Fluke 709H Precision Current Loop Calibrator with HART Calibration

  • Best-in-class accuracy at 0.01 % reading
  • Compact rugged design
  • Intuitive user interface with quick-set knob for fast setup, easy use
  • 24 V dc loop power with mA measure mode (-25 % to 125 %)
  • Resolution of 1 µA on mA ranges and 1 mV on voltages ranges
  • Built in selectable 250 Ω resistor for HART communications
  • Simple two wire connection for all measurements
  • Auto shutdown to conserve battery life
  • Variable step and ramp time in seconds
  • Valve test (source and simulate defined mA values with % keys
  • Fast transfer of calibration data. The 709H/Track software/cable documents the parameters of all the HART transmitters in your plant, in either (.csv) or (.txt) format
  • Data logging or recording data on a particular transmitter for troubleshooting. The data log tool offers selectable capture interval from 1 to 60 seconds and a logging capacity of 9800 records or 99 individual sessions. Each data sample contains the 709H measurement, all four process variables, and the standard status conditions.
  • Built-in HART modem for communication capability to perform the following commands:
    • Read Message
    • Read Tag, Descriptor, Cal Date
    • Read Sensor PV info
    • Read PV Output info
    • Read Long Tag
    • Write PV Ranges (Upper and Lower)
    • Enter/Exit Fixed Current Mode
    • Set Zero Offset
    • Trim DAC Zero
    • Trim DAC Gain
Click here for a larger image of the Fluke 709HClick here for a larger image
Fluke HI8732 Shown
Product Information
Datasheet 1.06 MB PDF
PDF HelpPDF Help
 

The Fluke 709H Precision Current (mA) loop calibrators are designed to save time and produce high-quality results. The Fluke 709 calibrator is built around a user friendly interface with a quick-set rotary encoder knob. The Fluke 709H tool reduces the time it takes to measure, or source, current and power up a loop. The protective holster easily fits into a technician’s hand and the large backlit display is easy to read, even in dark, cramped worked areas.

The Fluke 709H adds HART communications and supports a select set of the HART universal and common practice commands. This makes the Fluke 709H unique as both an affordable, compact loop calibrator and powerful HART communication troubleshooting tool.

In the communicator mode the user will be able to read basic device information, perform diagnostic tests, and trim the mA output on most HART enabled transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop computer with HART modem. The Fluke 709H will allow virtually any technician to service and support HART devices.

 
Specifications
Functions
  • mA source
  • mA simulate
  • mA read
  • mA read/loop power
  • volts read.
Ranges mA (0 to 24mA)
Volts (0 to 30VDC)
Resolution 1 ΜA on mA ranges
1 mV on voltage range
Accuracy 0.01% +/- 2 counts, all ranges (@23° +/- 5°C)
Operating temperature range -10°C to 55°C (14°F to 131°F)
Humidity range 10 to 95% non-condensing
Stability 20 ppm of F.S. /°C from -10°C to 18°C and 28°C to 55°C
Display 128 x 64 pixels, LCD Graphic w/backlight, .34" high digits
Power 6 AAA alkaline
Battery Life 40 hours typical
Loop Compliance Voltage 24VDC @ 20mA
Over-Voltage Protection 240 VAC
Overload Current Protection 28 mA DC
EMC EN61326 Annex A (Portable Instruments)
Dimensions (L x W x D) 6" x 3.6" x 1.3" (15 cm x 9 cm x 3 cm)
Weight 0.3 kg (9.5 ounces)
Warranty Three year
 
Ordering Information
Model Description Buy Online Price
Fluke 709H
MFR ID: 4234361 
Fluke 709H Precision Current Loop Calibrator with HART Calibration Buy Now $1,299.95
Included Accessories
  • 2 - Two AC72 alligator clips
  • 1 - TL75 test leads
  • 6 - Extended tooth alligator clip set
  • 6 - 75X-8014 stackable lead set
  • 6 - TP220 Test Probes
  • 6 - AC280 SureGrip Hook Clips
  • 6 - HART cable
  • 6 - Soft Case
  • 6 - AAA batteries (installed)
  • 1 - Product Manual (CD-ROM)
  • 1 - Quick Reference Guide
  • 1 - 709/709H Safety Information
  • 1 - Instructions
Included
Optional Accessories
709H/TRACK
MFR ID: 4281225 
Fluke 709H/TRACK Data Logging Software and Cable for the Fluke 709H Loop Calibrator Buy Now Sale $359.96
(Reg. $399.95)
Care Plans
Fluke G3P-Group2
MFR ID: 4112750 
Fluke G3P-GROUP2 Gold CarePlan - Extends warranty from 3 to 5 yrs & includes annual NIST calibration Buy Now Sale $381.60
(Reg. $424.00)
Fluke G3P-Group3
MFR ID: 4112811 
Fluke G3P-GROUP3 Gold CarePlan - Extends warranty from 3 to 5 yrs & includes annual NIST calibration Buy Now Sale $764.10
(Reg. $849.00)
Clips
Fluke AC280
MFR ID: 1610115 
Fluke AC280 SureGrip Hook Clips, (one red, one black) Buy Now Sale $27.29
(Reg. $33.75)
Fluke AC283
MFR ID: 1610144 
Fluke AC283 SureGrip Pincer Clips, (one red, one black) Buy Now Sale $33.59
(Reg. $41.55)
Fluke AC285
MFR ID: 1610159 
Fluke AC285 SureGrip Large Alligator Clips, (one red, one black) Buy Now Sale $18.88
(Reg. $23.35)
Fluke AC87
MFR ID: 1278079 
Fluke AC87 Heavy Duty Bus Bar Clip Set, (one red, one black) Buy Now Sale $35.93
(Reg. $41.55)
Fluke AC89
MFR ID: 873448 
Fluke AC89 Heavy Duty Insulation Piercing Test Clip Buy Now Sale $33.59
(Reg. $41.55)
Test Probes
Fluke 80T 150UA
MFR ID: 3190456 
Fluke 80T-150UA Universal Temperature Probe Buy Now Sale $233.96
(Reg. $259.95)
Fluke TP38
MFR ID: 1541636 
Fluke TP38 Slim Reach Test Probe Set (Red/Black) Buy Now Sale $14.28
(Reg. $18.15)
Fluke TP1
MFR ID: 650887 
Fluke TP-1 1000V/10A CAT II Slim Reach Test Probes (Red/Black) Buy Now Sale $14.68
(Reg. $18.15)
Fluke TP2
MFR ID: 650892 
Fluke TP2 1000V/10A CAT II Slim Reach Test Probes, 2mm Diameter Tips (Red/Black) Buy Now Sale $15.65
(Reg. $18.15)
Fluke TP4
MFR ID: 650895 
Fluke TP4 1000V/10A CAT II Slim Reach Test Probes (Red/Black) Buy Now Sale $15.65
(Reg. $18.15)
Fluke TP80
MFR ID: 873455 
Fluke TP80 Electronic Test Probes (Red/Black) Buy Now Sale $29.17
(Reg. $33.75)
Fluke TP220
MFR ID: 1670056 
Fluke TP220 1000V/10A CAT II Suregrip Industrial Test Probes, 12 mm Dia tip (Red/Black) Buy Now Sale $15.65
(Reg. $18.15)
Test Leads
Fluke TL26A
MFR ID: 1273172 
Fluke TL26A 5-Way Silicone Insulated Test Lead Set (Red/Black) Buy Now Sale $49.45
(Reg. $57.15)
Fluke TL27
MFR ID: 668571 
Fluke TL27 Heavy Duty Test Lead Set (Red/Black) Buy Now Sale $29.17
(Reg. $33.75)
Fluke TL28A
MFR ID: 1273185 
Fluke TL28A Automotive Alligator Clip Test Lead Set (Red/Black) Buy Now Sale $42.69
(Reg. $49.35)
Fluke TL71
MFR ID: 1274382 
Fluke TL71 1000V/10A CAT II Premium Test Lead Set (Red/Black) Buy Now Sale $20.98
(Reg. $25.95)
Fluke TL75
MFR ID: 855705 
Fluke TL75 1000V/10A CAT II Hardpoint Test Lead Set (Red/Black) Buy Now Sale $18.88
(Reg. $23.35)
Fluke TL76
MFR ID: 2032684 
Fluke TL76 1000V/10A CAT II 2/4mm Silicone Test Lead Set (Red/Black) Buy Now Sale $24.48
(Reg. $31.15)
Fluke TL80A
MFR ID: 1277086 
Fluke TL80A Basic Electronic Test Lead Set with C75 Carrying Case (Red/Black) Buy Now Sale $62.97
(Reg. $72.75)
Fluke TL81A
MFR ID: 1277073 
Fluke TL81A Deluxe Test Lead Set, 300V, Pouch, 22 Pc. (Red/Black) Buy Now Sale $119.95
(Reg. $145.55)
Fluke TL220
MFR ID: 2003625 
Fluke TL220 Suregrip Industrial Test Lead Set (Red/Black) Buy Now Sale $63.03
(Reg. $77.95)
Fluke TL221
MFR ID: 2003602 
Fluke TL221 Suregrip Silicone Test Lead Extension Kit (Red/Black) Buy Now Sale $20.98
(Reg. $25.95)
Fluke TL223
MFR ID: 2003633 
Fluke TL223 Suregrip Electrical Test Lead Set, AC220, TP1, TL224 (Red/Black) Buy Now Sale $63.03
(Reg. $77.95)
Fluke TL224
MFR ID: 1610198 
Fluke TL224 SureGrip Silicone Insulated Test Leads (Red/Black) Buy Now Sale $20.98
(Reg. $25.95)
Fluke TL238
MFR ID: 2132831 
Fluke TL238 SureGrip Test Lead Set for High Energy Environments (Red/Black) Buy Now Sale $67.45
(Reg. $77.95)
Temperature Pressure Modules
Fluke 80TK
MFR ID: 736736 
Fluke 80TK Type K Thermocouple Conversion Module Buy Now Sale $128.95
(Reg. $145.55)
PV350
MFR ID: 919811 
Fluke PV350 Digital Pressure Vacuum Module Buy Now Sale $421.16
(Reg. $467.95)
Cases and Holsters
Fluke C100
MFR ID: 827055 
Fluke C100 Universal Hard Carrying Case Buy Now Sale $44.42
(Reg. $57.15)
Fluke C195
MFR ID: 677408 
Fluke C195 Zippered Soft Carrying Case with Storage Compartments and Shoulder Strap Buy Now Sale $150.25
(Reg. $179.95)
Fluke C25
MFR ID: 681114 
Fluke C25 Large Zippered Soft Carrying Case for most DMMs Buy Now Sale $29.38
(Reg. $36.35)
Fluke C800
MFR ID: 896220 
Fluke C800 Hard Carrying Case with Detachable Lid Buy Now Sale $44.42
(Reg. $57.15)