<< Fluke Test
Leads, Probes and Clips
|
Fluke ITP120 Optically Isolated
External Trigger Probe
|
- Designed for use with Fluke ScopeMeter 120-series
- The probe connects to the optical port of the
ScopeMeter 120, and features isolated external triggering, for
measurements that require external triggering or triggering on
floating reference signals
- Probe length is 1.2m (48 inch)
- The probe includes a hookclip with ground lead, and a 9-Volt
Alkaline battery.
|
 
Fluke ITP120 Shown |
| |
| Specification |
| Input impedance |
10MΩ in parallel with 15pF |
| Trigger level |
TTL compatible (High = 2V, Low = 0.8V) |
| Minimum pulsewidth |
7 µs |
| Maximum frequency |
50 kHz |
| Maximum voltage to ground |
600 Vrms, CAT II per IEC1010-2-031 |
| Maximum signal voltage |
600 Vrms, CAT II per IEC1010-2-031 |
|
| |
)
