HOME > FLUKE > ACCESSORYCHARTS > CURRENT-CLAMPS > 3310PR-TF fluke logo

Fluke 3310-PR-TF
5000A Flex Thin Flex Current Probe, 2 Feet Long
For the Fluke 1750 Power Recorder

Click here for a larger image of the Fluke 3310-PR-TFClick for larger image
Fluke 3310-PR-TF Shown
Product Information
Datasheet 370 KB PDF Datasheet
PDF HelpPDF Help

The Fluke 3310-PR-TF 5000A Flex Thin Flex Current Probe  is an ac current probe utilizing the Rogowski principle. The Fluke 3310PRTF Probe is designed for use with the Fluke 1750 Power Recorder and measures current from very low frequencies up to the 50th harmonic of a 50/60 Hz power supply. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas and around large conductors.

 
Specifications
Electrical Characteristics
Measurement Range 100 to 5000 A (with a crest factor ≤3)
Frequency Range 40 Hz to 5 kHz
Accuracy (@ 25°C) ±1% of reading
Linearity
(10 % to 100 % of range)
±0.2% of reading per °C
Temperature Coefficient ±0.05% of reading per °C
Position Sensitivity
(w/ cable >25 mm from coupling)
±2% of reading
External Field
(w/ cable >200 mm from head)
±1% of reading
Working Voltage
(see Safety Standards)
1000V ac rms or dc
General Characteristics
Probe and Cable Material Alcryn 2070NC, reinforced insulation, UL94 V0, Color: RED
Probe Cable Length 24 in. (610 mm)
Probe Cable Diameter 0.3 in. (8 mm)
Transducer Bend Radius (min) 1.5 in. (38.1 mm)
Output Cable 2 core screened, double insulated, 3 meters long
Output Connector LEMO 6 pin male connector
Operating Temperature Range -4 to +158°F (-20 to +70°C) (the temperature of the conductor under test shall not exceed 176°F /80°C)
Storage Temperature Range -40 to 176°F (-40 to +80°C)
Operating Humidity 15% to 85% (non condensing)
Altitude max 6562 ft. (2000 m)
Degree of ingress protection IP40 (IEC 60529)
Safety Standards
EN/IEC 61010-1:2001
EN/IEC 61010-031:2002+A1:2008
EN/IEC 61010-2-032:2002
Pollution Degree 2
Use of the Probe on uninsulated conductors is limited to 1000 V under CAT III installations and 600 V under CAT IV installations ac rms or dc and frequencies below 1 kHz.
Note that the safety rating for the output to ground is limited to 30 V ac rms or dc by the connector specified.
 
Ordering Information
Model Description Buy Online Price
Fluke 3310 PR Fluke 3310-PR-TF 5000A Flex Thin Flex Current Probe for the Fluke 1750 Power Recorder Buy Now $1,199.95