HOME > FLUKE > ACCESSORIES > CURRENT-CLAMPS > FS17XX fluke logo

Fluke FS17XX & FS17XX IP65 Series
AC Current Probes Sets
For the Fluke 1735, 1743, 1744, & 1745

Click here for a larger image of the Fluke FS17xxClick for larger image
Fluke FS17XX Shown
Product Information
Manual 232 KB Click on the link to open the PDF in a new window
PDF HelpPDF Help

The Fluke FS17XX current probe sets are for accurate non-intrusive measurement of ac currents and are used with Fluke 1735 and all Fluke 1740 products. The Fluke FS17XX IP65 can be used in more rugged environments than either the Fluke 1735 or 1745. Integrated memory for calibration data provides current ranges from 0.44A up to 3000A in a frequency range of 40Hz to 5kHz.

 
Electrical Characteristics
Input ranges II L1, L2, L3, N: 15 /150 / 1500 / 3000A AC
Measuring Range: 0.44A to 3000A AC
Intrinsic error: <2% of II
Position influence: max. ±2% of m.v. for distance conductor to measuring head >30mm (1.18 in)
Stray field influence: <±2 A for Iext= 500A AC and distance to measuring head >200mm (7.87 in)
Temperature coefficient: <0.05%/K
Current transformer: ratio : ≤999 kA / ≤II
Ratio selection: by job programming for 174x series; by setup menu for 1735
Connection: 3-phase, 3-phase + N; 2-phase L1 and L3 (2W-meter-method); 7-pole connector
General Specifications
Cable length: 2m (79 in)
Length of measuring head: 61cm (24 in)
Operating temperature range: 10°C to +70°C (14°F to 158°F)
Protection Class: FS17XX IP65-IP65, FS17XX- IP41
Operating Humidity: 10% to 80%, non-condensing
Storage temperature range: -20°C to +90°C (-4°F to 198°F)
Weight: .92 kg (2.03 lb)
EMC Standards: IEC/EN 61326-1:2006
Reference Conditions
Environment temperature
range:
+18°C to +26°C (64.4°F to 78.8°F)
Humidity: 20 to 75% rh
Altitude: max. 2000 m (1.24 mi) for 1000V CAT III / 600V CAT IV
max. 5000 m (3.107 mi) for 600 V CATIII / 300 V CATIV
Current: upper value of selected range sinusoidal waveform, 48 Hz to 65 Hz
Distortion Factor: <1%, no DC component, stray field <40 A/m, conductor centered within the Probe.
Safety Standards IEC/EN61010-1:2001
IEC/EN61010-2-032:2002
IEC/EN61010-031:2002
Safety Specifications
Category Rating: 1000 V CAT III, 600 V CAT IV, pollution degree 2. The application of the Probe on uninsulated conductors is limited to 1000 V ac rms or dc to ground and frequencies below 1 kHz.
 
Ordering Information
Model Description Buy Now Price
FS17X5-TF
MFR ID: 3889407
Fluke FS17X5-TF Shielded 4-phase AC Current Thin Flexi Probe Set (15A/150A/1500A/3000A) Buy Now $1,839.00
FS17XX IP65-TF
MFR ID: 3889418
Fluke FS17XXIP65-TF Shielded 4-phase AC Current Thin Flexi Probe Set,IP65 Rated, for the 1743 & 1744 Buy Now $2,039.95
FS17XX-1PH-TF
MFR ID: 3889429
Fluke FS17XX/1PH-TF Shielded 1-phase AC Current Thin Flexi Probe Set for 1735, 1743, 1744, & 1745 Buy Now Sale $413.10
(Reg. $459.00)