Fluke Networks FQM-100-M-VFL

Name: Fluke Networks FQM-100-M-VFL Fiber QuickMap Multimode Fiber Distance & Fault Locator with VisiFault
Brand: Fluke Networks
SKU: FQM100MVFL
Price: 3231.99 USD
Availability: InStock

Our Part No. FQM100MVFL

Mfr. Model FQM-100-M-VFL

Catalog No. 4774951

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Fluke Networks FQM-100-M-VFL

Our Part No. FQM100MVFL

Mfr. Model FQM-100-M-VFL

Catalog No. 4774951

The Fluke Networks FQM100MVFL Fiber QuickMap measures length and identifies high loss events on multimode fiber optic cable. Like an OTDR, a laser sends light pulses through fiber and measures the power and timing of light reflected from high loss connections and splices, and the end of the fiber. VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks.

Fiber QuickMap
For multimode fiber, 9/125µm and 62.5/125µm

This product is available for shipping to the US, Canada, and Puerto Rico only.

Datasheet

$2,866.95 Price $3,231.99

This item ships FREE

Key Features

Fiber QuickMap
Works on multimode fiber, 9/125µm and 62.5/125 µm
850 nm output wavelength. Measure up to 4,921 feet (1,500 metres) of fiber in seconds
Locate severe bends, high-loss splices, breaks and dirty connectors in singlemode fiber
Measure and locate high-loss splices
Locate the end of a fiber
Find potential sources of high bit error rates caused by reflectance from dirty or poor connections
Detects live optical signals before it begins testing
Quick set-up. Connect your fiber and press the Test button. No lengthy set-up necessary
Find problems quickly. Six-second test time—no more blind troubleshooting that can waste hours
Change the Index of Refraction (IOR) to improve fiber length accuracy
Visible in dark areas. Backlighted display turns off automatically
Removable SC adapter is easily cleaned
Optional LC, ST and FT interchangeable adapters are available
Long battery life, 1,500 tests (typical) from 2 AA alkaline batteries
Rugged construction; vibration and drop tested to 1 meter
VisiFault Visual Fault Locator
Locates visual faults including tight bends, breaks and bad connectors
Accelerates end-to-end fiber checks
Easily verifies polarity and identifies fibers

Details

The Fluke Networks FQM-100-M-VFL Fiber QuickMap measures length and identify high loss events on multimode fiber optic cable. Like an OTDR, a laser sends light pulses through the fiber and measures the power and timing of light reflected from high loss connections and splices, and the end of the fiber. VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks. They are not very helpful for cable runs more than a few meters, or when the cable is not visible or accessible, or when the laser light can’t penetrate the jacket. Optical Time Domain Reflectometers (OTDR) provide graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time and skill to operate.

The FQM100MVFL Fiber QuickMap fills the gap between a VFL and an OTDR. The Fiber QuickMap has the simplicity of a VFL, and provides distance and power information on high losses, breaks, and the end of the fiber. The FQM-100-M-VFL also identifies live fiber.

The FQM-100-M-VFL includes the VisiFault Visual Fault Locator with 2.5 mm universal adapter. Fluke Networks VisiFaultTM Visual Fault Locator (VFL) allows you to diagnose and repair simple fiber link problems. The laser-powered VisiFault Visual Fault Locator is a cable continuity tester that locates fibers, verifies cable continuity and polarity. This cable continuity tester helps find breaks in cables, connectors and splices. Continuous and flashing modes make for easier identification. Compatible with 2.5mm and 1.25mm connectors for easy connection. Ruggedly constructed for demanding field-testing. This visual fault locator has a long battery life for hours of use.

More Information