Fluke Calibration 9100S/725-KIT
Dry-Well & Process Calibrator Bundle

  • Bundle includes both the Fluke Calibration 725 Process calibrator and the 9100S Dry Well with the Block "A" dry-well configuration
  • 725: Two separate channels; measure, source and view process signals simultaneously
  • Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
  • Measure or source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Source mA with simultaneous pressure measurement to conduct valve and I/P tests
  • Perform fast linearity tests with auto step and auto ramp features
  • Power transmitters during test using 24 V loop supply and simultaneous mA measurement
  • Store frequently-used test setups for later use
  • 9100S:Smallest dry-wells in the world
  • Proprietary Hart Scientific controller
  • Accuracy to +/-0.25 C, stability of +/-0.05 C at 0 C
  • RS-232 interface with Hart Interface-it software
Click here for a larger image - Fluke Calibration 9100S/725-KIT Hi-Temp Dry-Well & Process Calibrator BundleClick here for a larger image
Fluke Calibration 9100S/725-KIT Shown
Product Information
Datasheet 189 KB PDF
PDF HelpPDF Help
Despite its small size (2 1/4 inches high and 5 inches wide) and light weight, the 9100S remains a powerful dry-well.

It’s simple and convenient, too. Anyone can learn to use one in less than 15 minutes. It has a range to 375 °C (707 °F) and is perfect for checking RTDs, thermocouples, and small bimetal thermometers in the field.

Plug it in, switch it on (Note, these wells are fixed and not interchangeable,) set the temperature with the front-panel buttons, and insert your probe into the properly sized well. Compare the reading of your device to the display temperature or to an external reference, and the difference is the error in your device. With a proprietary Fluke Calibration temperature controller, the 9100-S has a display resolution of 0.1 degrees, an accuracy of ±0.5 °C, a stability of ±0.1 °C, and a stabilization time of just five minutes.
Ordering Information
Model Description Buy Online Price
MFR ID: 4550143
Fluke Calibration 9100S/725-KIT Hi-Temp Dry-Well & Process Calibrator Bundle Buy Now $4,360.00
Related Products
MFR ID: 4550155
Fluke Calibration 9102S/725-KIT Hi-Temp Dry-Well & Process Calibrator Bundle Buy  Now $5,555.00
Optional Accessories
9300 Fluke 9300 Rugged Carrying Case for 9100 Buy  Now Sale $130.50
(Reg. $145.00)