Teledyne FLIR T540-42-NIST

Thermal Imaging Camera with NIST Certificate, MSX, UltraMax, 42° Lens, 464 x 348, -4 to 2732°F, 30 Hz

T54042NIST
T540-42-NIST
79303-0201-NIST

Teledyne FLIR T540-42-NIST

Thermal Imaging Camera with NIST Certificate, MSX, UltraMax, 42° Lens, 464 x 348, -4 to 2732°F, 30 Hz

T54042NIST
T540-42-NIST
79303-0201-NIST

The Teledyne FLIR T54042NIST Thermal Imaging Camera with 42° Lens and NIST Calibration diagnoses potential faults in industrial, electrical, and mechanical systems. Temperature anomalies can also be discovered for users in research and development settings. The built-in Macro Mode allows users to switch from wide angle to close-up analysis without changing the lens.

  • IR Resolution: 464 x 348 px
  • Image Frequency: 30 Hz
  • Temperature Range: -4 - 2732°F
This product is available for shipping to the US, Canada, and Puerto Rico only.
$17,469.00
This item ships FREE
  • 42° lens with 464 x 348 resolution
  • Object temperature range: -4 to 2732°F
  • 1 x 6 continuous zoom
  • Reduce strain of full-day inspections with 180° rotating optical block for imaging targets overhead or below
  • Scan large areas from safe distances, delivering 161,472 non-contact temperature measurement points
  • Share lenses (wide angle to telephoto) across your fleet of cameras, thanks to AutoCal optics
  • Ensure crisp thermal imagery and spot-on temperature readings every time with laser-assisted autofocus
  • Get image clarity from FLIR Vision Processing, with MSX, UltraMax, and proprietary adaptive filtering features
  • Determine accessibility of components for repair with one touch by activating on-screen laser distance measurement
  • See problems and make decisions easily, thanks to scratch-resistant 4 in. LCD display
  • Quickly access menus, folders, and settings using intuitive controls, including rapid-response touchscreen and two programmable buttons
  • Optimize workflows with streamlined reporting features, such as built-in voice annotation, text comments with auto-fill, and image sketch
  • Prepare precise documentation with embedded GPS locations, as well as measurement data from METERLiNK-enabled FLIR clamps and multimeters
  • Laser distance and on-screen area measurement
  • Customizable work folders
  • Intelligent, interchangeable AutoCal lenses
FLIR Solutions: EBT Screening with Thermal Imagers Promotional Banner

The Teledyne FLIR T540-42-NIST Thermal Imaging Camera with NIST Certificate, MSX, UltraMax, 42° Lens, 464 x 348, -4 to 2732°F, 30 Hz is designed to support advanced thermographers and IR service consultants in the power generation, electrical distribution, and manufacturing industries, by focusing on resolution, speed, and ergonomics. With the 180° rotating optical block, vibrant LCD display, and streamlined form factor, the T540-42-NIST offers inspectors the necessary tools to support comprehensive inspections in challenging conditions, especially when equipment is obstructed from view or difficult to access.

MSX Technology

Multi-Spectral Dynamic Imaging (MSX) Technology adds visible spectrum definition to IR images by detecting the edges of objects. Text becomes clearly visible so that you can read a label or identifier within the IR image. This exclusive function provides extraordinary thermal detail that instantly highlights and orients problem locations and eliminates the need to refer back to a visual image for detail.

Original IR Image

Original IR Image

Image with MSX Enhancement

Image with MSX Enhancement


UltraMax Technology

UltraMax is an image enhancement technology in the T540 that captures a series of thermal images and combines the data into one new image. The result is an impressive quadrupling of thermal pixels, including full radiometric measurement data.

As a result, UltraMax thermal images will be clearer and larger, allowing for a better analysis of small details. Because of an increased number of pixels covering the same target area, UltraMax also decreases measurement spot size. This gives greater measurement accuracy to particularly small details. With the new UltraMax feature, users can obtain even better results, allowing them to be even more productive.

UltraMax is a type of superresolution, a technique for combining the information from multiple original images into an image with higher resolution and less noise. This might seem similar to two other scaling techniques - interpolation and pixel averaging. However, they are totally different.

UltraMax uses the natural movement of the human body to capture an image set in which each image is slightly offset from the others. This results in a wealth of data that is much greater than any one image could provide. The data is combined to form an image that includes many more pixels of the target, resulting in a resolution greater than that of the original camera detector. The data is also used to create a clearer image, since pixel noise can be reduced through comparing similar points in multiple images.

Teledyne FLIR UltraMax captures 16 thermal images in less than one second. These are stored on the camera as a single jpg file, and will appear as one image when viewed on the camera or in software. This is the UltraMax functionality. The enhanced image will have twice the original resolution and four times as many pixels. All pixels still include radiometric data, just as with normal Teledyne FLIR thermal images.

As a result, UltraMax thermal images will be clearer and larger, allowing better analysis of small details. Because of an increased number of pixels covering the same target area, UltraMax also decreases measurement spot size. This gives greater measurement accuracy to particularly small details.

NIST Certificate of Traceability

Teledyne FLIR's exclusive 12-Point Inspection and Calibration Program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST).

12-Point Inspection and Calibration Program:

  • Perform a complete operational check
  • Image calibration and camera alignment, when applicable
  • Verify all internal cable and PCB connections
  • Upgrade internal camera software to latest revisions
  • Perform minor repairs
  • Verify and/or calibrate IR image as needed each temperature range for image uniformity
  • Verify ambient temperature compensation as needed
  • Re-calibration to ensure it meets factory specification
  • Perform quality approved acceptance test procedure
  • Provide certificate of conformance
  • Provide calibration certificate (optional, extended calibration certificate with measured values)
  • Clean optics; viewfinder cleaned when applicable
  • *Does not include parts or labor required to meet calibration standards, nor additional lens/filter calibrations.
More Information
Country of OriginEstonia
BrandTeledyne FLIR
Catalog79303-0201-NIST
ConditionNEW
UPC793950792308
Vendor AliasFLIR T540-42-NIST
  • 1 - Thermal Imaging Camera
  • 1 - NIST Certificate of Traceability
  • 1 - 42° Lens
  • 2 - Batteries
  • 1 - Battery Charger
  • 1 - Hand Strap
  • 1 - Hard Transport Case
  • 1 - Lanyard
  • 1 - Front Lens Cap
  • 1 - Power Supplies
  • 1 - SD Card (8 GB)
  • 1 - USB 2.0 A to USB Type-C Cable
  • 1 - USB Type-C to HDMI Cable
  • 1 - USB Type-C to USB Type-C Cable
  • 1 - User Manual
Customers Also Bought