Phone 800-517-8431

Flir IRW-2C

2 in. Infrared (IR) Inspection Window

Brand: Flir
Model No: IRW-2C
MPN: 19250-100
Our Model No: IRW2C
Condition: NEW
PDF Document Icon Data Sheet (651 KB)


Product Features:

  • Only one hole to create for each window
  • One simple PIRma-Lock ring nut to tighten
  • Uses standard US punch tools for hole knockouts
  • Teeth lock tight to the inside of the panel
  • Automatically grounds metal components
  • No screw holes required that might later strip out
  • Easy, flip-open hatch for faster scans
  • Prevents dropping, mix-ups, and loss
  • Inside label for permanent identifi cation
  • Transmits short, mid and longwave IR images
  • Supports visual inspections and fusion features
  • Lets laser pointers and illumination shine through
  • Requires only one person instead of three
  • Can reduce or eliminate need for cumbersome PPE
  • Helps reduce vast majority of arc fl ash triggers
  • Meets relevant UL, CSA, IEC, and IEEE standards/ratings
  • Tested samples withstood arcs, vibration, and extreme humidity
  • Limited Lifetime Warranty against manufacturer defects

The FLIR IRW-2C 2 in. Infrared (IR) Inspection Window features a secure, permanently-hinged cover that opens easily with one hand, which means there's nothing to remove, drop, mix up, or lose. FLIR's broadband crystal allows cameras to capture visible light pictures as well as thermal images and lets LED and laser illumination pass straight through for clearer visual assessments.

Opening electrical cabinets to perform IR and visual inspections of live components is dangerous work, exposing you to the risk of a hazardous arc flash incident. Out of necessity, it's also a painstaking, time-consuming process. Now you can put the added safety FLIR's IR Window between you and energized equipment to better protect yourself and eliminate the need for opening enclosures. The IRW-2C IR window helps you work faster with greater confidence. Perform inspections more efficiently and reduce the threat of arc flash injury significantly so you can get more done and stay in compliance with NFPA 70E requirements.

General Specifications
NEMA Environment Type Type 4/12 (outdoor/indoor)
Voltage Range Any
Automatically Grounded Yes
Maximum Operating Temperature 500°F (260°C)
Body Material Anodized aluminum
Gasket Material Silicone
Hardware Material Steel
Compatable with All FLIR Cameras Yes
PIRma-Lock Installation System Yes
Cover and Fastener Permanently Attached Yes
Single-Hole Installation Yes
Thumb Screw and Safety Screw Included Yes
Broadband IR: Short-, Mid-, and Long-Wave Yes
Visible Light Spectrum Yes
Picture-in-Picture and Fusion Image Blending Yes
Size Specifications
Overall Height 3.36 in. (85.5mm)
Overall Width 2.87 in. (73mm)
Overall Thickness 1 in. (25.5mm)
Required Actual Hole Diameter (Nominal) 2 3/8 in. (60.3mm)
Greenlee Punch 76BB
Recommended Panel Thickness Up to 1/8 in. (3.2mm)
Maximum Panel Thickness 3/16 in. (4.76mm)
Optic Specifications
Optic Material Calcium fluoride
Optic Diameter 1.97 in. (50mm)
Viewing Aperture Diameter 1.77 in. (45mm)
Viewing Aperture Area 2.46 in.² (1590mm²)
Optic Maximum Temperature 2474°F (1355.6°C)
Ratings and Testing
UL Component Recognition (UL 50V) Yes
UL 50/NEMA Environment Rating Type 4/12
CSA Certification, Product Class3211 07 Yes
Arc Flash Testing, IEC 62271-200 (KEMA) 5kV, 63kA for 30 cycles at 60 Hz
IP Rating, IEC 60529 (TUV) IP67
Vibration Testing, IEC 60068-2-6 (TUV) 100 m/s^2 vibration Withstand
Vibration Testing, IEC 60068-2-6 (TUV) Extreme humidity withstand
Mechanical Testing, ANSI/IEEE C37.20.2 section A3.6 (TUV) Impact and load resistant cover
Maximum Pullout Strength 1450 lbs. (657 kg)
Data Sheet: PDF Document Icon (651 KB)
↑ Back to Top