Test Equipment Depot Top Nav Bar


	\|

Test Equipment Catalog

Specials

Repair

Surplus

Ordering/Contact Info

Fitel Catalog | Fitel Price List

<< Fitel Catalog
<< Fitel Fusion Splicer's

Fitel S183PM-II
Advanced Fusion Splicer - with Polarization Maintaining Fusion

Splicing specialty and exotic fiber combinations
Very large diameter fiber splicing (up to 500µm)
Polarization maintaining fiber splicing
High-strength splicing application
Fast splice time!

Fitel S183PM-II Shown

Product Information
Datasheet	1.2 MB
PDF Help

Specialty Splicing Made Easy – The advanced features of the S183PM-II Fusion Splicer allow you to splice today’s and tomorrow’s most exotic fiber types. Whether performing high-strength splices, splicing small cladding fibers (80 μm), large cladding fibers (500 μm), high Δ splicing combinations, PM fibers, or erbium doped fiber, the S183PM-II is the splicer for your highend application.

Fast Splice Time – The splice time is lightning fast at 35 seconds for PANDA and 15 seconds for SM. The S183PM-IIFusionSplicer is the fastest in the industry for most fiber applications, allowing you to increase efficiency on your production line.

Safe PM Fiber Rotation – The new rotation mechanism on the S183PM-II Fusion Splicer allows PM fiber to rotate while keeping it straight and stable. This minimizes fiber twist, which can be detrimental to sensitive splicing applications.

Quick Loading & Automatic Machine Adjustment – The S183PM-II Fusion Splicer automatically adjusts for different fiber coating and cladding sizes. There is no need to exchange v-grooves, or fiber clamps. In addition, the S183PM-II Fusion Splicer has been designed so that the user simply loads the fiber and closes the lid to begin the fusion process. There is no need to lower or set fiber clamps before beginning your splice.

Automatic Fiber Holder Release – The S183PM-II Fusion Splicer automatically performs a tensile proof test on the fiber and releases the holder lid to avoid twisting the fiber after the splice. This automation eliminates the need for the user to manually open and reset the splicer after each fusion splice.

Specification Fitel S183PM-II
Applicable Fibers	SMF, MMF, DSF, NZDSF, CSF, EDF, PMF, LDF
Cladding Diameter	80~500 μm
Coating Diameter	160~2000 μm
Fibers Cleave Length	3~5 mm with coating clamping 9~11 mm with bare fiber clamping
Typical Insertion Loss Similar Fiber Splicing	0.02 dB for identical SMF / 0.01 dB for identical MMF 0.04 dB for identical DSF / 0.05 dB for identical PMF
Typical Insertion Loss Dissimilar Fiber Splicing	0.05 dB for SMF to PANDA Fiber 0.15 dB for SMF to BOW-TIE Fiber
Typical Extinction Ratio Cross Talk Similar Fiber Splicing	-40 dB (0.6 degree) for identical PANDA Fibers -32 dB (1.4 degree) for identical BOW-TIE Fibers
Typical Extinction Ratio Cross Talk Dissimilar Fiber Splicing	-30 dB (1.8 degree) for PANDA Fiber to BOW-TIE Fiber
Loss Estimation Parameter	Cleave angle. Fiber Offset, Tilt, Micro-bending, Fiber end gap, Bubbling a splice point
Splice Time	15 seconds for identical Single-Mode Fibers 35 seconds for identical PM fibers (cladding clamping) 55 seconds for identical PM fibers (coating clamping)
Heat Time	51 seconds 60mm sleeves 40 seconds 40mm sleeves
Return Loss	>60dB
Tensile Strength	Typical 300kpsi (25N) with High strength splice
Magnification	215x and 430x
Monitor	6.5” B-color LCD monitor
Video Output	Analog RGB
Data Interface	Serial, USB ver.2.0 and Ethernet
Splice Programs	60 Default/150 Available
Splice Memory	Maximum 2000 splices
Operating Temperature	0 to +40 °C (without excessive humidity)
Storage Temperature	-40 to +60 °C (without excessive humidity)
Power Source	AC 100 to 240 V (50/60 Hz) with AC adaptor
Dimensions/Weight	350W x 197D x 154H (mm) / 8.5 kg

Ordering Information
Model	Description	Buy Online	Price
S183PMII	The advanced features of the S183PM-II Fusion Splicer allow you to splice today? and tomorrow? most exotic fiber types. Whether performing high-strength splices, splicing small cladding fibers (80 ?m), large cladding fibers (500 ?m), high ? splicing combinations, PM fibers, or erbium doped fiber, the S183PM-II is the splicer for your highend application. The splice time is lightning fast at 35 seconds for PANDA and 15 seconds for SM. The S183PM-II FusionSplicer is the fastest in the industry for most fiber applications, allowing you to increase efficiency on your production line.		$36,415.00
Included Accessories
	1 Pair 250μm Coating Fiber Holders 1 Pair 400μm Coating Fiber Holders 1 Pair 900μm Coating Fiber Holders 1 AC adaptor 1 AC Power Cord 1 Spare Electrodes (pair) 1 Electrode sharpener 1 User Manual	Included