| Specification Fitel S183PM |
| Applicable Fibers |
SMF, MMF, DSF, NZDSF, CSF, DSF, DCF, EDF, PMF |
| Cladding Diameter |
80~200 μm |
| Coating Diameter |
160~900 μm |
| Fibers Cleave Length |
3~5 mm with coating clamping
9~11 mm with bare fiber clamping |
Typical Insertion Loss
Similar Fiber Splicing |
0.02dB for Identical Single-Mode Fibers
0.01dB for Identical Multi-Mode Fibers
0.04dB for Identical Dispersion Shifted Fibers
0.05dB for Identical PM Fibers |
Typical Insertion Loss
Dissimilar Fiber Splicing |
0.05dB for Single-Mode Fiber to PANDA fiber
0.10dB for Single-Mode Fiber to TIGER fiber
0.15dB for Single-Mode Fiber to BOW-TIE fiber
0.10dB for PANDA Fiber to TIGER fiber |
Typical Extinction Ratio
Cross Talk
Similar Fiber Splicing |
-405dB (0.6 degrees)for identical PANDA fibers
-32dB (1.4 degrees)for identical TIGER fibers
-32dB (1.4 degrees) for identical BOW-TIE fibers |
Typical Extinction Ratio
Cross Talk
Dissimilar Fiber Splicing |
-32dB (1.4 degrees)for PANDA to TIGER fiber
-30dB (1.8 degrees) for PANDA to BOW-TIE fiber |
| Loss Estimation Parameter |
Cleave angle. Fiber Offset, Tilt, Micro-bending, Fiber end gap, Bubbling a splice point |
| Splice Time |
20 seconds for identical Single-Mode Fibers
42 seconds for identical PM fibers (cladding clamping)
60 seconds for identical PM fibers (coating clamping) |
| Heat Time |
90 seconds 60mm sleeves
95 seconds 40mm sleeves
40 seconds 25mm sleeves |
| Return Loss |
>60dB |
| Tensile Strength |
Typical 300kpsi (25N) with coating clamping |
| Magnification |
133x and 266x |
| Monitor |
5” B-color LCD monitor |
| Video Output |
PIN |
| Data Interface |
Serial, USB ver.2.0 and Ethernet |
| Splice Programs |
55 Default/150 Available |
| Splice Memory |
Maximum 2000 splices |
| Operating Temperature |
0 to +40 °C (without excessive humidity) |
| Storage Temperature |
-40 to +60 °C (without excessive humidity) |
| Power Source |
AC 100 to 240 V (50/60 Hz) with AC adaptor |
| Dimensions/Weight |
350W x 197D x 154H (mm) / 8.7 kg |
)
PDF Help