<< Fitel Catalog
<< Fitel Fusion Splicer's |
Fitel S153A-VK
Hand-Held Active Alignment Splicer Value Kit |
| |
Kit Includes:
- S153A Fusion Splicer
- Hard Carrying Case
- 1 Battery Pack
- Power Cord
- V-Groove Cleaning Brush
- Spare Electrodes
- Electrode Sharpener
- AC Adaptor
- User's Manual
- Cleaver
- Fiber stripper
- Prep. fluid and wipes
- Configurable holders and clamps, see below.
|
 
Fitel S153A Shown
|
|
|
| |
The Fitel S153A using “Active V-Groove alignment” is the first choice for low cost field optical fiber splicing equipment. The Active V-Groove technology used on the S153A delivers low loss splices with ease while eliminating common Fixed V-Groove splicing errors. Using the same rugged metal body as also-new FITEL S178, S153A is designed to endure harsh operating conditions by improving shock/impact resistance with rubber pads embedded on 4 corners of the splicer body. It also achieves water resistance compliant to IPX2 and dust resistance compliant to IP5X.
Another key feature of the S153A is the significantly reduced operation time. Protection sleeve shrink time is mere 25 seconds, while splicing requires only 9 seconds. Power saving technology used in these machines allows up to 200 splicing cycles (splicing and heating) with 2 built in rechargeable batteries.
By combining ease of use, improved speed, precision, durability and portability, the S153A Fusion Splicer becomes your first choice for a versatile low cost splicer with a wide range of applications. |
| |
| Specification Fitel S153A |
| Applicable Fibers |
SM (ITU-T G.652), MM (ITU-T G.651), DSF (ITU-T G.653), NZD (ITU-T G.655), BIF/UBIF (Bend insensitive fiber, ITU-T G.657) |
| Cladding Diameter |
80~150 μm |
| Coating Diameter |
160~900 μm |
| Fibers Cleave Length |
5~16 mm |
| Average Splice Loss |
SM: 0.04 dB, MM: 0.02 dB, DSF: 0.06 dB, NZD: 0.06 dB |
| Splice Time |
9 seconds (semi-auto mode)
11 seconds (regular mode) |
| Heat Time |
25 seconds (S922: 40mm Sleeve, S921: 60mm Sleeve) (Pre-heat mode)
31 seconds (S922: 40mm Sleeve, S921: 60mm Sleeve) (regular mode) |
| Splice Programs |
Max. 150 |
| Heat Programs |
Max. 18 |
| Automatic Heating Start |
Available |
| Applicable Sleeves |
20/40/60 mm |
| Fiber Holding |
Tight holder (Loose tube applicable) or Fiber Holder System |
| Tension Test |
1.96N |
| Fiber Image Magnification |
76X, 235X |
| Splice Memory |
Max. 2,000 |
| Image capture Capacity |
Last 100 images to be automatically captured + Up to 24 images to be stored permanently |
| Dimension |
127W × 199D × 105H mm (not including shock absorber)
159W × 231D × 130H mm (including shock absorber) |
| Weight |
1.7 kg (without battery)
2.1 kg (with two batteries) |
| Monitor |
3.5” color LCD monitor |
| Data Output |
USB ver.2.0 mini |
| Displaying Language |
20 languages (e.g. English, Spanish, Japanese, Chinese) |
| Battery Capacity |
Typical 80 splice/heat cycles with single battery
Typical 200 splice/heat cycles with 2 batteries |
| Altitude |
5,000 mh |
| Operating Temperature |
-10 to +50 °C (without excessive humidity) |
| Storage Temperature |
-40 to +60 °C (without excessive humidity) |
| Power Source |
AC Input 100 to 240 V (50/60 Hz), DC Input 11 to 17 V |
|
| |
| Configurable Options |
| S153AVK10 |
Value Kit with 10mm clamps |
| S153AVK250 |
Value Kit with 250um Fiber Holders |
| S153AVK900 |
Value Kit with 900um Fiber Holders |
|
| |
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| S153AVK10 |
Fitel S153A-VK-10 Hand-Held Active Alignment Splicer Value Kit with 10mm Fiber Clamps and one battery pack |
 |
$9,315.00 |
| S153AVK250 |
Fitel S153A-VK-250 Hand-Held Active Alignment Splicer Value Kit with 250um Fiber Holders and one battery pack |
|
$9,315.00 |
| S153AVK900 |
Fitel S153A-VK-900 Hand-Held Active Alignment Splicer Value Kit with 900um Fiber Holders and one battery pack |
|
$9,315.00 |
|
)
PDF Help