<< Fitel Catalog
<< Fitel Fusion Splicer's |
Fitel S153A
Hand-Held Active Alignment Splicer |
| |
- Active V-groove, More Reliable than conventional Fixed V-groove machines
- Rugged and compact hand held design for demanding environmental conditions
- Fast splice (9 sec) at super low loss and Fast Heating (25 sec)
- 200 cycles (Splicing and Heating) with Fitel series battery configuration
- Available for All METRO/LAN/FTTx fibers including ultra bend-insensitive fibers (e.g. EZ-BendTM)
- Splicer is compatible with the Seikoh Giken and Diamond Spliceon- connector (SOC)
- Easy maintenance - Toolless electrode replacement/mirror free alignment system
- Easy Software upgrade via the Internet
- Easily exchanged fiber holder systems (tight holder/fiber holder/SOC holder)
- PC interface software to allow user manage splicing programs and results
- Auto-start shrink sleeve oven feature
- Improved GUI to further enhance ease-of-use
- Large memory for storing data (2,000 splice data) and image (100 images)
- RoHS compliant
|
 
Fitel S153A Shown
|
|
|
| |
The Fitel S153A using “Active V-Groove alignment” is the first choice for low cost field optical fiber splicing equipment. The Active V-Groove technology used on the S153A delivers low loss splices with ease while eliminating common Fixed V-Groove splicing errors. Using the same rugged metal body as also-new FITEL S178, S153A is designed to endure harsh operating conditions by improving shock/impact resistance with rubber pads embedded on 4 corners of the splicer body. It also achieves water resistance compliant to IPX2 and dust resistance compliant to IP5X.
Another key feature of the S153A is the significantly reduced operation time. Protection sleeve shrink time is mere 25 seconds, while splicing requires only 9 seconds. Power saving technology used in these machines allows up to 200 splicing cycles (splicing and heating) with 2 built in rechargeable batteries.
By combining ease of use, improved speed, precision, durability and portability, the S153A Fusion Splicer becomes your first choice for a versatile low cost splicer with a wide range of applications. |
| |
| Specification Fitel S153A |
| Applicable Fibers |
SM (ITU-T G.652), MM (ITU-T G.651), DSF (ITU-T G.653), NZD (ITU-T G.655), BIF/UBIF (Bend insensitive fiber, ITU-T G.657) |
| Cladding Diameter |
80~150 μm |
| Coating Diameter |
160~900 μm |
| Fibers Cleave Length |
5~16 mm |
| Average Splice Loss |
SM: 0.04 dB, MM: 0.02 dB, DSF: 0.06 dB, NZD: 0.06 dB |
| Splice Time |
9 seconds (semi-auto mode)
11 seconds (regular mode) |
| Heat Time |
25 seconds (S922: 40mm Sleeve, S921: 60mm Sleeve) (Pre-heat mode)
31 seconds (S922: 40mm Sleeve, S921: 60mm Sleeve) (regular mode) |
| Splice Programs |
Max. 150 |
| Heat Programs |
Max. 18 |
| Automatic Heating Start |
Available |
| Applicable Sleeves |
20/40/60 mm |
| Fiber Holding |
Tight holder (Loose tube applicable) or Fiber Holder System |
| Tension Test |
1.96N |
| Fiber Image Magnification |
76X, 235X |
| Splice Memory |
Max. 2,000 |
| Image capture Capacity |
Last 100 images to be automatically captured + Up to 24 images to be stored permanently |
| Dimension |
127W × 199D × 105H mm (not including shock absorber)
159W × 231D × 130H mm (including shock absorber) |
| Weight |
1.7 kg (without battery)
2.1 kg (with two batteries) |
| Monitor |
3.5” color LCD monitor |
| Data Output |
USB ver.2.0 mini |
| Displaying Language |
20 languages (e.g. English, Spanish, Japanese, Chinese) |
| Battery Capacity |
Typical 80 splice/heat cycles with single battery
Typical 200 splice/heat cycles with 2 batteries |
| Altitude |
5,000 mh |
| Operating Temperature |
-10 to +50 °C (without excessive humidity) |
| Storage Temperature |
-40 to +60 °C (without excessive humidity) |
| Power Source |
AC Input 100 to 240 V (50/60 Hz), DC Input 11 to 17 V |
|
| |
The S153A Splicer Package gives extra options with a standard style that accommodates both fixed clamps and removable fiber holders.
Increasing the number of batteries means
increased operating time. |
| |
| Configurable Options |
| Fiber Holder Type |
1 |
16 mm Tight Holder S712T-016 |
| 2 |
10 mm Tight Holder S712T-010 |
| 3 |
Fiber Holder System |
No. of Battery Packs
(S943B) |
0 |
No Battery |
| 1 |
1 pack (with 1 S958B battery charger and 1 S977A AC adaptor) |
| 2 |
2 packs (with 1 S958B battery charger and 1 S977A AC adaptor) |
| Example: Model number S153A21, S153A unit with 10mm clamps and 1 battery pack |
|
| |
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| S153A10 |
Fitel S153A-1-0 Hand-Held Active Alignment Splicer with 16mm clamps and no battery pack |
 |
$7,600.00 |
| S153A11 |
Fitel S153A-1-1 Hand-Held Active Alignment Splicer with 16mm clamps and one battery pack |
|
$7,800.00 |
| S153A12 |
Fitel S153A-1-2 Hand-Held Active Alignment Splicer with 16mm clamps and two battery packs |
|
$7,950.00 |
| S153A20 |
Fitel S153A-2-0 Hand-Held Active Alignment Splicer with 10mm clamps and no battery pack |
|
$7,600.00 |
| S153A21 |
Fitel S153A-2-1 Hand-Held Active Alignment Splicer with 10mm clamps and one battery pack |
|
$7,800.00 |
| S153A22 |
Fitel S153A-2-2 Hand-Held Active Alignment Splicer with 10mm clamps and two battery packs |
|
$7,950.00 |
| S153A30 |
Fitel S153A-3-0 Hand-Held Active Alignment Splicer with 1 set of fiber holders and no battery pack |
|
$7,600.00 |
| S153A31 |
Fitel S153A-3-1 Hand-Held Active Alignment Splicer with 1 set of fiber holders and one battery pack |
|
$7,800.00 |
| S153A32 |
Fitel S153A-3-2 Hand-Held Active Alignment Splicer with 1 set of fiber holders and two battery packs |
|
$7,950.00 |
| Included Accessories |
|
Standard Package Includes:
- 1 Carrying case
- 1 Battery pack and charger(depending on configuration)
- 1 AC adapter
- 1 AC cable cord
- 1 Electrodes (pair)
- 1 Electrode sharpener
- 1 Cleaning Brush
- 1 User Manual
|
Included |
| S153A Kits |
| S153ABK10 |
Fitel S153A-BK-10 Hand-Held Active Alignment Splicer Basic Kit with 10mm Fiber Clamps (basic kit does not include battery, prep fluid or wipes) |
|
$9,100.00 |
| S153ABK250 |
Fitel S153A-BK-250 Hand-Held Active Alignment Splicer Basic Kit with 250um Fiber Holders (basic kit does not include battery, prep fluid or wipes) |
|
$9,100.00 |
| S153ABK900 |
Fitel S153A-BK-900 Hand-Held Active Alignment Splicer Basic Kit with 900um Fiber Holders (basic kit does not include battery, prep fluid or wipes) |
|
$9,100.00 |
| S153AEX10 |
Fitel S153A-EX-10 Hand-Held Active Alignment Splicer Extended Kit with 10mm Clamps and two battery packs |
|
$9,465.00 |
| S153AEX900 |
Fitel S153A-EX-900 Hand-Held Active Alignment Splicer Extended Kit with 250 and 900um Fiber Holders and two battery packs |
|
$9,850.00 |
| S153AVK10 |
Fitel S153A-VK-10 Hand-Held Active Alignment Splicer Value Kit with 10mm Fiber Clamps and one battery pack |
|
$9,315.00 |
| S153AVK250 |
Fitel S153A-VK-250 Hand-Held Active Alignment Splicer Value Kit with 250um Fiber Holders and one battery pack |
|
$9,315.00 |
| S153AVK900 |
Fitel S153A-VK-900 Hand-Held Active Alignment Splicer Value Kit with 900um Fiber Holders and one battery pack |
|
$9,315.00 |
| Optional Accessories |
| S712S250 |
FFitel S712S-250 Fiber Holders, 250 um coating diameter fiber. For S153A/S178A |
|
$450.00 |
| S712S900 |
Fitel S712S-900 Fiber Holders, 900 um coating diameter fiber. For S153A/S178A |
|
$450.00 |
| S712T010 |
Fitel S712T-010 Tight Holder, 10 mm Fiber Clamp for S153A/S178A |
|
$450.00 |
| S712T016 |
Fitel S712T-016 Tight Holder. 16 mm Fiber Clamp. For S153A/S178A |
|
$450.00 |
| S943B |
Fitel S943B Battery Pack For S153A/S178A |
|
$150.00 |
| S422 |
Fitel S422 Tool Kit with Single Fiber Cleaver |
|
$685.00 |
|
)
PDF Help