Fieldpiece AMN2
Manometer Accessory Head

Click here for a larger image of the Fieldpiece AMN2 Manometer Accessory Head
Fieldpiece AMN2 Shown
Product Information
Datasheet 607 KB PDF Datasheet
Manual 1.5 MB PDF Datasheet
PDF HelpPDF Help
  • Works with any Fieldpiece expandable instrument or handle or any DMM with mVDC ranges
  • Measure gas pressure on 3/16" and 5/16" regulator ports
  • Enough resolution and sensitivity to measure static pressure
  • ZERO Set on face of instrument
  • Auto Power-Off (APO) for data logging pressure
  • Low battery LED indicator

The Fieldpiece AMN2 is a manometer accessory head for use with our modular multimeters (DMMs) and instruments. The Fieldpiece AMN2 measures gas pressure with enough resolution to measure static pressure. The Fieldpiece AMN2 includes a zero adjust and the Auto Power-Off (APO) function to conserve battery life. Disable APO for data logging. The Fieldpiece AMN2 measures pressure between -60inWC and 60inWC (inches of water column). Take static pressure measurements using the resolution mode of 0.01inWC.

Fieldpiece AMN2 Settings

Use the Fieldpiece AMN2 to measure gas pressure or static pressure. Simply connect to COM and Volts jacks on your meter using any Fieldpiece test leads with removable probe tips. For Fieldpiece "stick-style" meters, adapters and handles, slide the head directly onto the unit. Select the mVDC range on your meter. Press the ZERO Set button on the face of the Fieldpiece AMN2. ZERO while the tube is disconnected to calibrate the meter to ambient pressure. Connect the hose to the pressure source to get the gauge pressure relative to the ambient or ZERO pressure.

Field Pressure Calibration
Press and hold the ZERO Set button on the face of the Fieldpiece AMN2. Disconnect the hose from the pressure port to properly calibrate to ambient pressure. To take static pressure measurements quickly across a blower as in the diagram example, press ZERO Set button while the user is connected to the pressure source before the blower then connect to the pressure source after the blower and take the reading.

Resolution Modes (0.1 and 0.01)
There are two modes of resolution on the Fieldpiece AMN2. The 0.1 mode of the Fieldpiece AMN2 is useful for most applications. When measuring low pressures, 0.01 will likely be the best mode for meaningful testing. The most common circumstance for 0.01 mode is measuring static pressure across a blower. Only when using 0.01 mode, the display of your meter will show the true measurement X 10. So if the true measurement is -0.02, your meter will show -0.2.

Pressure Ports: Tube connector for 3/16 inch (4mm) I.D. flexible tubing
Units of Measure: inches of water column ("WC)
Accuracy: @ 73°F, <90%RH, ±0.4rdg (-20 to 20"WC), applied before dividing reading by 10 on 2"WC range, ±1.0rdg (-60 to -20"WC and +20 to +60"WC)
Resolution: 0.1 or 0.01 depending on resolution selected (If 0.01"WC resolution is selected you must divide displayed value by 10 for actual value).
Measurement Range: -60.0"WC to 60.0"WC
Operating environment: 32ºF (0°C) to 105ºF (41°C), 15-90%RH
Compatible media: Dry, non-corrosive gases
Battery: Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22.
Battery Life: 150 hours, low battery LED indicator on accessory head
Overrange: "OL" or "-OL" is displayed
Auto power off: 15 minutes
Dimensions: ~5 3/16"(131mm) (H) x ~2 7/16"(67mm) (W) x ~1 1/4"(32mm)(D)
Weight: approximately 154g (~1/2 pound) including battery
Ordering Information
Model Description Buy Online Price
AMN2  Fieldpiece AMN2 Manometer Accessory Head Buy Now Sale $68.80
(Reg. $86.00)
Included Accessories
  • 1 - 3/16” tubes with brass fitting
  • 1 - 3/16” to 5/16” tube adapter (RMA316)
  • 1 - 9V battery (installed)
  • 1 - Operator’s manual
Recommended Instruments/Units
ADMN2 Fieldpiece ADMN2 Dual-Port Manometer Accessory Head Buy Now Sale $106.40
(Reg. $133.00)
HS36 Fieldpiece HS36 Expandable True RMS Stick Multimeter with Backlight Buy Now Sale $212.00
(Reg. $265.00)
EHDL1 Fieldpiece EHDL1 Electronic Accessory Head Handle Buy Now Sale $28.80
(Reg. $36.00)
SDMN5 Fieldpiece SDMN5 Handheld Dual-Port Manometer Buy Now Sale $119.20
(Reg. $149.00)