Fieldpiece ACDC6 Shown
- Works with any Fieldpiece expandable instrument or handle or any DMM with mVDC ranges
- Angled jaw opens to 1.8 inches and makes singling out a wire fast and easy
- Coiled cable makes remote testing easy and clutter free
- Zero adjust dial for quick, accurate measurements
- Low battery LED indicator
The Fieldpiece ACDC6 is an AC / DC Current Clamp Accessory that gives technicians more flexibility
when testing line current. The clamp enables most multimeters to measure current up to 600A without
breaking the circuit. The Fieldpiece ACDC-6's jaw opens to 1.18 inches (3 cm). A coiled cable keeps
clutter out of the testing area, Quickly zero out the clamp using the adjustable dial on the face. Use
with any multimeter with industry standard Volt and COM jacks and mV AC and DC ranges. Green mechanical
contractors also are known for using the Fieldpiece AC/DC6 clamp to measure high-current lines on
integrated solar panel / HVAC / Water systems.
The Fieldpiece ACDC/6 enables most multimeters to measure AC or DC current up to 600A without breaking
the circuit. The Fieldpiece AC/DC-6 converts current measured in amperes into mV AC or DC on multimeters
with industry standard jacks and appropriate mV AC and DC ranges. The conversion displayed on the
multimeter is your Amp reading.
Originally designed for electrical applications, the Fieldpiece ACDC6 AC / DC Current Clamp Accessory
is the only current clamp in HVAC that can measure both alternating and direct current without breaking
the circuit. The Fieldpiece ACDC6 is used primarily for high current systems and Residential applications,
which include those involving high-current photovoltaic (solar) cells.