HOME > EXTECH > CLAMPMETERS > PQ342 extech logo

Extech PQ34-2
200A Current Clamp Probes
Set of 3 clamp probes with 0.8" (19mm) jaw opening

  • Current Sensing Jaws
  • 200A-20A range switch
  • Signal output plugs (+, red; -, black)
  • DCV power plug
Click here for a larger image - PQ342Click for larger image
Extech PQ34-2 Shown

Product Information
Manual 160 KB PDF
pdf helpPDF Help
 
A set of three 200A current probes designed to be used with the Extech PQ3450 or PQ3470 Power Analyzers. These probes are shipped fully tested and calibrated and, with proper use, will provide years of reliable service.
 
Specifications
Measurement ranges 20A and 200A, switch selectable
Output sensitivity 10mV/A on the 20A range
1mV/A on the 200A range
Output coupling AC coupled
Accuracy (50/60Hz) ± 1% F.S. @ 23 ± 5°C
Frequency range 45 to 400 Hz
Phase error (50/60Hz) < ± 1°
Minimum load 100 K ohm for specified accuracy
Enclosure material UL 94-V0 rated
Safety IEC 1010, Category III 600V
Power Supply 8V± 1V (supplied from meter)
Max. Jaw Open Size 19 mm (0.75 inch) Dia.
Operating Temperature 0°C to 50°C (32°F to 122°F)
Cable length 4 meters (13.17 feet)
 
Ordering Information
Model Description Buy Online Price
PQ34-2 Extech PQ34-2 200A Current Clamp Probes (Set Of 3) Buy Now $499.99

*NOTE: Items ordered with optional NIST calibration will require
approximately 10 days to complete the certification.