HOME > DRUCK > THERMOCOUPLE-CALIBRATORS > DPI822 druck logo

GE Druck DPI 822
Thermocouple/Loop Calibrator

Click here for larger image of the GE Druck DPI 822Click here for a larger image
GE DPI822 Shown
Product Information
Datasheet 550 KB PDF Datasheet
Manual 555 KB PDF Datasheet
Click here for Information Regarding PDF'sPDF Help
  • Measure and source thermocouples
  • Advanced Cold Junction compensation virtually eliminates errors due to ambient temperature changes
  • Large backlit display, menu driven interface
  • mA measure, switch test and 24V loop power
  • HART loop resistor
  • Robust and weatherproof
  • Compact, simple to use, easy to carry
  • Convenient, one-handed operation
  • Secure grip, impact resistant, elastomer protected
  • Plug and play connector for Intelligent Digital Output Sensor (IDOS) Universal Measurement Modules (More>>)
  • Applications:
    • Temperature test and maintenance
    • Transmitter calibration
    • Loop set-up and diagnostics
    • Switch verification

The GE Druck DPI 822 Thermocouple Loop Calibrator provides simultaneous T/C output and mA measurement for transmitter and loop maintenance. The GE Druck DPI822's 24 V Loop Power Supply energizes transmitters and control loops. An Automatic Switch Test captures open/closed trip values providing a fast and highly accurate "safety system" check. Also a HART Resistor can be switched into the GE Druck DPI-822's loop when required by a HART digital communicator and avoids the inconvenience of carrying a 250Ω resistor.

 
Features & Specifications
Temperature Instrumentation and Loop Maintenance
Thermocouple Loop Calibrator Provides simultaneous T/C output and mA measurement for transmitter and loop maintenance
24 V Loop Power Supply Energizes transmitters and control loops
Automatic Switch Test Captures open/closed trip values providing a fast andhighly accurate "safety system" check
HART Resistor Can be switched into the loop when required by a HART digital communicator and avoids the inconvenience of carrying a 250Ω resistor
IDOS
Flexibility
Intelligent Digital Output Sensor (IDOS) Universal Pressure Modules are available from 10 in H2O to 10,000 psi (25 mbar to 700 bar).
Total Flexibility IDOS modules can be used with any compatible instrument; for example, a DPI 812 RTD loop calibrator can become a fully featured pressure calibrator.
Plug and Play Modules are interchangeable between instruments, requiring no set-up or instrument calibration.
Cold Junction Error 0.4°F (0.2°C) maximum error for 86°F (30°C) change inambient temperature.
Thermocouple connectors Mini-jack sockets
Type Standard Accuracy Range
IEC 584 1.1°F (0.6°C) -454°F to 2498°F (-270°C to 1370°C)
J IEC 584 0.9°F (0.5°C) -346°F to 2192°F (-210°C to 1200°C)
T IEC 584 0.6°F (0.3°C) -454°F to 752°F (-270°C to 400°C)
B IEC 584 1.8°F (1.0°C) 122°F to 3308°F (50°C to 1820°C)
R IEC 584 1.8°F (1.0°C) -58°F to 3216°F (-50°C to 1769°C)
S IEC 584 2.5°F (1.4°C) -58°F to 3216°F (-50°C to 1769°C)
E IEC 584 0.7°F (0.4°C) -454°F to 1832°F (-270°C to 1000°C
N IEC 584 1.1°F (0.6°C) -454°F to 2372°F (-270°C to 1300°C)
L DIN 43710 0.6°F (0.3°C) -328°F to 1652°F (-200°C to 900°C)
U DIN 43710 0.6°F (0.3°C) -328°F to 1112°F (-200°C to 600°C)
C 1.8°F (1.0°C) 32°F to 4208°F (0°C to 2320°C)
D 1.8°F (1.0°C) 32°F to 4523°F (0°C to 2495°C)
mV -10 to 100 mV
Measure Accuracy
0 to 55.000 mA 0.02% reading + 3 counts
Temperature coefficient 14°F to 50°F, 86°F to 122°F; 0.0011% FS/°F
(-10°C to 10°C, 30°C to 50°C; 0.002% FS/°C)
Switch detection Open and closed. 2 mA current
Loop power output 24V ±10% (35 mA maximum)
HART mA loop resistor 250Ω (menu selection)
Electrical connectors 4mm sockets
Common Specifications
Operating Temperature 14°F to 122°F (-10°C to 50°C)
Storage Temperature -4°F to 158°F (-20°C to 70°C)
Humidity 0% to 90% non-condensing, Def Stan 66-31, 8.6 Cat III
Shock and Vibration BS EN61010:2001, Def Stan 66-31, 8.4 Cat III
EMC BS EN61326-1:1998 + A2:2001
Safety Electrical BS EN61010:2001. CE marked
Display Graphic LCD with backlight. Resolution 99999
Size (l x w x h) and Weight 7.1 in x 3.3 in x 2 in (180 mm x 85 mm x 50 mm), 14 oz (400 g)
Batteries 3 AA alkaline, >80 hours measure, 11 hours mA source(24V @ 12 mA)
 
Ordering Information
Model Description Buy Online Price
I822 Druck DPI 822 Thermocouple/Loop Calibrator  Buy Now $1,215.00
Included Accessories
  • 1 - Calibration Certificate
  • 1 - User's Manual
  • 1 - Set of Electrical Test Leads
  • 3 - AA Alkaline Batteries
Included
Optional Accessories
IO800A Druck IO800A Carrying Case  Buy Now $57.60
IO800B Druck IO800B Belt clip, strap, hanger  Buy Now $31.99
IO800C Druck IO800C Battery Charger and Batteries  Buy Now $117.00
IO800E Druck IO800E Data Logging  Buy Now $208.00