HOME > DRUCK > PRESSURE-INDICATORS > DPI800 druck logo

GE Druck DPI 800 and DPI 802
Pressure Indicator/Loop Calibrator

Click here for a larger image of the GE Druck DPI-800Click here for a larger image
GE Druck DPI800 Shown
Product Information
Datasheet 557 KB PDF Datasheet
Manual 550 KB PDF Datasheet
Click here for Information Regarding PDF'sPDF Help
  • Ranges from 10 in H2O to 10,000 psi (25 mbar to 700 bar)
  • Single or dual range configuration
  • mA measure, switch test and 24V loop power
  • Large backlit display, menu driven interface
  • HART® loop resistor
  • Robust and weatherproof
  • Compact, simple to use, easy to carry
  • Convenient, one-handed operation
  • Secure grip, impact resistant, elastomer protected
  • IDOS pressure sensors provide accuracies to 0.05% FS all-inclusive or 0.01% precision (More Info >>)

The GE Druck DPI 800 and DPI 802 Series of Pressure Indicator/Loop Calibrators is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, the GE Druck DPI-800 and DPI-802 are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.

The GE Druck DPI800 & DPI802 Pressure Indicators are ideal pressure measurement tools. Pressure ranges from 25 mbar to 700 bar including vacuum options. All-inclusive accuracy can be relied on from one year to the next, even in tough environmental conditions.

Applications
  • Pressure test and maintenance
  • Transmitter calibration
  • Loop set-up and diagnostics
  • Switch verification
Features & Specifications
Pressure Test and Measurement
DPI 800 Pressure Indicator The ideal tool for pressure test and measurement
Pressure Ranges 10 in H2O to 10,000 psi (25 mbar to 700 bar) including vacuum options
All-Inclusive Accuracy Can be relied on from one year to the next, even in tough environmental conditions (see specifications)
Dual Sensor Configuration Extended measurement range and simultaneous two channel reading (P1 and P2 or P1 - P2)
Stainless Steel Sensor
Construction
Available for compatibility with a wide range of fluids and gases (refer to range table)
Programmable Leak Test Reports the pressure drop and leak rate
Advanced Features Hold, maximum/minimum/average, alarm, and tare facilitate troubleshooting
Pressure Instrument and Loop Maintenance
DPI 802 Pressure Loop Calibrator Provides simultaneous pressure and mA measurement for transmitter and loop maintenance
Dual Readings Simultaneous measurement of pressure and mA for transmitter calibration and loop maintenance
24V Loop Power Supply Energizes transmitters and control loops
Automatic Switch Test Captures open/closed trip values providing a fast and highly accurate "safety system" check
HART Resistor Can be switched into the loop when required by a HART digital communicator and avoids the inconvenience of carrying a 250Ω resistor
IDOS Flexibility (Optional)
Intelligent Digital
Output Sensor (IDOS)
Universal Pressure Modules are available from 10 in H2O to 10,000 psi (25 mbar to 700 bar).
Total Flexibility IDOS modules can be used with any compatible instrument; for example, a DPI 812 RTD loop calibrator can become a fully featured pressure calibrator.
Plug and Play Modules are interchangeable between instruments, requiring no set-up or instrument calibration
Range Expansion Achieved by adding modules (please refer to the IDOS Universal Pressure Module)
Pressure Range
[P1]: <Range P1>
[P2]: <Range P2>
G/D
Gauge/
Differential
G
Gauge
A
Absolute
Media Accuracy %FS
+ - Standard Premier
±10 in H2O (25 mbar) Non-corrosive
gas/fluid
Non-corrosive
gas
0.1 0.03
±1 psi (70 mbar) Non-corrosive
gas/fluid
Non-corrosive
gas
0.1 0.03
±3 psi (200 mbar) Non-corrosive
gas/fluid
Non-corrosive
gas
0.1 0.03
±5psi (350 mbar) Non-corrosive
gas/fluid
Non-corrosive
gas
0.1 0.03
  - 0.05 N/A
±10 psi (700 mbar) Non-corrosive
gas/fluid
Non-corrosive
gas
0.1 0.03
-15 to 15 psi
(-1 to 1 bar)
Non-corrosive
gas/fluid
Non-corrosive
gas
0.075 0.01
-15 to 30 psi
(-1 to 2 bar)
Non-corrosive
gas/fluid
Non-corrosive
gas
0.075 0.01
  - 0.05 N/A
-15 to 50 psi
(-1 to 3.5 bar)
Stainless steel,
compatibility
- 0.05 0.01
-15 to 100 psi
(-1 to 7 bar)
Stainless steel,
compatibility
- 0.05 0.01
  - 0.075 N/A
-15 to 150 psi
(-1 to 10 bar)
Stainless steel,
compatibility
- 0.05 0.01
-15 to 300 psi
(-1 to 20 bar)
Stainless steel,
compatibility
- 0.05 0.01
  - 0.075 N/A
0 to 500 psi
(35 bar)
Stainless steel,
compatibility
- 0.05 0.01
0 to 1000 psi
(70 bar)
Stainless steel,
compatibility
- 0.05 0.01
0 to 1500 psi
(100 bar)
Stainless steel,
compatibility
- 0.05 0.01
0 to 2000 psi
(135 bar)
Stainless steel,
compatibility
- 0.05 0.01
0 to 3000 psi
(200 bar)
Stainless steel,
compatibility
- 0.05 0.01
0 to 5000 psi (350 bar)
Sealed gauge
Stainless steel,
compatibility
- 0.05 N/A
0 to 10k psi (700 bar)
Sealed gauge
Stainless steel,
compatibility
- 0.05 N/A
S_Standard Accuracy Total accuracy over 32°F to 122°F (0°C to 50°C), including one year stability and calibration uncertainty
P_Premier Accuracy Precision over 65°F to 82°F (18°C to 28°C)
For operation over 41°F to 113°F (5°C to 45°C):
0.014% FS for ranges above 10 psi (700 mbar)
0.075% FS for ranges below 15 psi (1 bar)
Stability over a year:
0.01% reading ranges above 5 psi (350 mbar)
0.03% reading ranges below 10 psi (700 mbar)
Calibration uncertainty: 50 ppm of reading
Single or Dual Range One or two internal sensors can be selected.
For dual range instruments, G/D ranges will be configured as G (gauge).
Only one of the two sensors can be 1500 psi (100 bar) or above.
Overpressure 5 psi (350 mbar) and below 4 x FS
10 to 10,000 psi (700 mbar to 700 bar) 2 x FS
Maximum working pressure: 1.1 x FS
Pressure Connections 1/8 NPT female or G 1/8 female
 
Ordering Information
Model Description Buy Online Price
Base Models: Single Range
When ordering, please choose one Range and Compatible Pressure Gauge Type
(Gauge/Differential, Gauge, or Absolute)
DPI800 GE Druck DPI 800 Pressure Indicator: Standard Accuracy with 1/8" NPT Female pressure fitting Please Call
DPI800P-2 GE Druck DPI 800 Pressure Indicator: High/Premier Accuracy with 1/8" NPT Female pressure fitting Please Call
DPI802S1-1 GE Druck DPI 802 Pressure Loop Calibrator: Standard Accuracy with G1/8 pressure fitting Please Call
DPI802S1-2 GE Druck DPI 802 Pressure Loop Calibrator: Standard Accuracy with 1/8" NPT Female pressure fitting Please Call
DPI802PS1-2 GE Druck DPI 802 Pressure Loop Calibrator: High/Premier Accuracy with 1/8" NPT Female pressure fitting Please Call
Base Models: Dual Range
When ordering, please choose Two Ranges and Compatible Pressure Gauge Type
(Gauge/Differential, Gauge, or Absolute)
DPI800D-2 GE Druck DPI 800 Pressure Indicator: Standard Accuracy with 1/8" NPT Female pressure fitting Please Call
DPI800DP-2 GE Druck DPI 800 Pressure Indicator: High/Premier Accuracy with 1/8" NPT Female pressure fitting Please Call
DPI802D-1 GE Druck DPI 802 Pressure Loop Calibrator: Standard Accuracy with G1/8 pressure fitting Please Call
DPI802D-2 GE Druck DPI 802 Pressure Loop Calibrator: Standard Accuracy with 1/8" NPT Female pressure fitting Please Call
DPI802PD-2 GE Druck DPI 802 Pressure Loop Calibrator: High/Premier Accuracy with 1/8" NPT Female pressure fitting Please Call
Included Accessories
  • 1 - Calibration Certificate
  • 1 - User's Manual
  • 3 - AA Batteries
Included
Optional Accessories
IO800A Druck IO800A Carrying Case  Buy Now $49.89
IO800B Druck IO800B Belt clip, strap, hanger  Buy Now $26.53
IO800C Druck IO800C Battery Charger and Batteries  Buy Now $97.65
IO800E Druck IO800E Data Logging  Buy Now $186.00