This site uses cookies to provide an optimized shopping experience. By using this site, you agree the use of cookies within our privacy policy.
Desco 19246
Dual Operator Monitor, 120VAC
- Dual station continuous monitor for 2 operators and 2 work surfaces
- Continuously monitors the integrity of both operators and ESD workstations, eliminating the need for periodic testing and recording
- Banana Jack creates a more consistent connection and helps to prevent accidental disconnects with operator’s wrist strap
- Wave Distortion Technology provides real-time continuous monitoring for operator path to ground and presence Of 1 Meg resistor
- Dual station continuous monitor for 2 operators and 2 work surfaces
- Continuously monitors the integrity of both operators and ESD workstations, eliminating the need for periodic testing and recording
- Banana Jack creates a more consistent connection and helps to prevent accidental disconnects with operator’s wrist strap
- Wave Distortion Technology provides real-time continuous monitoring for operator path to ground and presence Of 1 Meg resistor
- True continuous monitoring (versus pulsed or intermittent) of wrist strap functionality and operator safety according to accepted industry standards
- Includes control unit and two satellite remote monitors
- Control unit can be mounted at eye level away for work area so that current status is easily monitored and satellite remotes can be mounted in desired locations up to 7 feet from control unit
- Each satellite includes a monitored wrist strap ground, parking snap, and unmonitored ground for guest, cart, equipment or other grounding applications
- Park Snap feature for each operator on satellite remote provides means for operator to disconnect wrist strap cord when normally leaving the workstation without audible (false) alarm sounding
- Audible and LED visual alarms activate instantly when a failure occurs, alerting user and supervisor of problem, allowing immediate corrective action
- Miniscule electrical current required to generate waveform monitoring signal
- Safe to use with sensitive components and no reported case of skin irritation
- Housing with screws or adhesive backed hook and loop strips
- NIST Calibrated
- For use with Single-Wire Wrist Straps
- Applications:
- Adjacent workstations for assembly, test, packaging, or other applications
The Desco 19246 Dual Operator Monitor, 120VAC continuously monitors the grounding integrity of two operators, and two ESD worksurfaces’ path to ground. The monitor will provide instantaneous notification of static control equipment failures, and eliminates the need of costly and difficult to supervise wrist strap logging record keeping. This unit is highly cost effective as it is designed to monitor any conventional single-wire wrist strap and ground cord system. The 19246 is a real time instrument that ensures that critical ESD control components in a sensitive area are effectively grounded. It independently monitors the operator and the worksurface. The instant an operator's wrist strap or cord fails, the monitor will issue audible and visual alarms alerting the user of the problem. In the same manner, the unit also confirms that a path to ground of less than 10 megohms (1 x 107 ohms) exists from the ESD protective worksurface(s).
Country of Origin | United States |
---|---|
Condition | NEW |
Brand | Desco |
Vendor Alias | 19246 |
- 2 - Satellite Remotes
- 1 - Power Adapter, 24VAC
- 2 - Mat Monitor Cords (Black), 6'
- 2 - Mat Ground Cords (Green and Yellow), 6'
- 2 - Satellite Remote Cables, 7'
- 4 - Countersink Washers and Screws (#4 x 1/4")
- 6 - Mounting Screws (#8 x 3/4")
- 1 - Certificate of Calibration