|
 
BK Precision 1045B Shown
|
- Checks corded telephones, cordless telephones, two-line telephones,
answering machines, fax machines, and automatic dialers
- Good/bad indication for every function of standard telephone
- Only the telephone being tested is needed for all telephone
tests
- Consumer oriented to allow unsupervised use by customers.
Instructions are short and easy to follow. For familial sounds,
tester provides dial tone and ring signal that are identical to
those supplied by telephone exchange
- Checks for shorts, broken or intermittent conductors, and
bad connectors
- Decodes dialing signals for both pulse and tone dial telephones
and indicated number dialed. Slow sequence display releases
approximately two numbers/second so that even rapidly dialed numbers
can be easily read. Can also test Redial and Memory dial function
of telephone. For tone dial telephones, indicator lights when
level is sufficient
- Two ringer levels selectable: NORMAL and LOW (worst case).
LOW level is approximately the minimum value that the telephone
company guarantees; NORMAL level is the typical level
- Indicator lights when voice level meets or exceeds minimum
acceptable level
- Tests automatic polarity circuit in telephone. Assures
that telephone will work if polarity of telephone line is reversed
- Permits testing of every function of two-line telephone
- Permits voice quality of telephone to be checked when a second
telephone is available. Fax machines and answering machines
can also be tested
- Power is applied to telephone jack to test operation of the
internal light in a "Princess" type telephone or any telephone with
a built-in light. The power is applied to the light only when
the SINGLE/AUX switch is in the SINGLE (out) position and the telephone
being tested in connected to TELEPHONE TEST JACK 1
|
){kind=small}
