<< B&K Precision Handheld Digital Multimeters

BK Precision 2707B
Tool Kit™ Digital Multimeter with Logic Probe

The 2707B is a full-featured manual ranging true RMS DMM that combines performance, value and functionality
The 2000 count LCD can display resistance values up to 2 Gohm, capacitance to 20 uF, or a transistors common-emitter gain value up to 1000
Value-packed features make this meter a must in every "Tool Kit®"
Large 3 1/2 digit, 2000 count LCD and one-handed operation make for easy and convenient use
It comes with the ability to measure True RMS, perform a Continuity test, Diode test, Logic test, and hFE Transistor test
Measures up to 10 A (AC & DC)
Measures DC voltage to 1000V, AC voltage to 750V
Measures Resistance to 2000 Mohm and Capacitance to 20 uF
Comes with magnetic hanger, one set test leads, one spare fuse, 9V battery (installed) and instruction manual

BK Precision 2707B Shown

Product Information
Datasheet	776 KB
Manual	258 KB
PDF Help

Specifications
DC Volts	Ranges	200 mV, 2 V, 20 V, 200 V, 1000V
	Resolution	0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
	Accuracy	±(0.8 % rdg + 1 dgts)
	Overload Protection	1000 VDC or 750 VACrms (600 VDC/Acrms for 15 seconds on 200 mV range)
	Input Impedance	10 MΩ
AC Volts (50 Hz - 500 Hz)	True RMS	Applies
	Ranges	200 mV, 2 V, 20 V, 200 V, 750V
	Resolution	0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
	Accuracy	200 mV & 20 V ranges: ±(1.5 % rdg + 8 dgts)
	Accuracy	200 V & 750 V ranges: ±(2.0 % rdg + 8 dgts)
	Crest Factor	<3
	Input Impedance	10 MΩ
	Overload Protection	1000 VDC or 750 VACrms (600 VDC/Acrms for 15 seconds on 200 mV range)
DC Current	Ranges	20 mA, 200 mA, 10 A
	Resolution	10 uA, 100 uA, 10 mA
	Accuracy	20 mA to 200 mA ranges:±(1.0%rdg+1dgts)
	Accuracy	10A range: ±(3.5%rdg+3dgts)
	Input Protection	0.5A/ 500V & 10A/ 600V fast blow ceramic fuses
	10A Input	10A for 60 sec max. followed by a 10 minute cooling period
AC Current (50 Hz - 500 Hz)	True RMS	Applies
	Ranges	20 mA, 200 mA, 10 A
	Resolution	10 uA, 100 uA, 10 mA
	Accuracy	20 mA to 200 mA ranges: ±(2.0 % rdg + 8 dgts)
	Accuracy	10 A range: ±(3.5 % rdg + 8 dgts)
	Input Protection	0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
	Crest Factor	<3
	10A Input	10 A for 60 sec max. followed by a 10 minute cooling period
Resistance	Ranges	200 Ω, 2 kΩ, 200 kΩ, 20 MΩ, 2000 MΩ
	Resolution	0.1 Ω, 1.0 Ω, 100 Ω, 10 kΩ, 1 MΩ
	Accuracy	200 Ωto 200 kΩranges: ±(1.0 % rdg + 4 dgts)
		20 MΩrange: ±(2.0 % rdg + 4 dgts)
		2000 MΩrange: ±(5.0 % rdg + 10 dgts)
	Open Circuit Voltage (typical)	0.3 VDC (3.0 VDC on 200 Ω, 2000 MΩrange)
	Overload Protection	500 VDC/ACrms
Capacitance	Ranges	2 nF , 20 nF, 200 nF, 2.0 uF, 20 uF
	Resolution	1 pF, 10 pF, 100 pF, 1 nF, 10 nF
	Accuracy	±(4 % rdg + 10 dgts)
	Overload Protection	Discharge capacitor before connecting
Frequency	Ranges	2 kHz, 20 kHz, 200 kHz, 2 MHz, 20 MHz
	Resolution	1 Hz, 10 Hz, 100 Hz, 1 kHz, 10 kHz
	Accuracy	±(0.1 % rdg + 3 dgts)
	Sensitivity	2.0 Vrms minimum
	Minimum Pulse Width	>25 ns
	Duty Cycle Limits	>30 % and <70 %
	Overload Protection	500 VDC/AC rms
Diode Test	Test Current	1.0 mA (typical)
	Resolution	10 mV
	Accuracy	±(1.5 % rdg + 3 dgts)
	Open Circuit Voltage	3.0 VDC (typical)
	Overload Protection	500 VDC/ACrms
Continuity	Audible Indication	Less than 100 Ω
	Response Time	100 ms
	Overload Protection	500 VDC/ACrms
Transistor hFE	Range	0 to 1000
Transistor hFE	Base Current	Approximately 10 uADC (VCE= 3.0 VDC)
Logic Test	Threshold	Logic Hi (2.8 V +0.8 V) / Logic Lo (0.8 V +0.5 V)
	Indication	40 msec beep at logic Lo
	Overload Protection	500 VDC/AC rms
General	Display	3 1/2 digit, 2000 count LCD
	Polarity	Automatic, positive implied, negative polarity indication
	Overrange	OL or -OL is displayed
	Low Battery Indication	The battery symbol will display when battery voltage drops below operating levels
	Measurement Rate	2.5 times per second
	Auto Power Off	Approximately 10 minutes
	Operating Environment	0ºC to 50ºC at <70 % relative humidity
	Storage Environment	-20ºC to 60ºC at 0 to 80 % relative humidity
	Accuracies	Stated accuracy at 23ºC +5ºC at <75% relative humidity
	Temperature Coefficient	0.1 x (specified accuracy) per ºC. (ºC to 18ºC, 28ºC to 50ºC)
	Power	Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
	Battery Life	150 hours typical
	Dimensions	165 mm (H) x 78 mm (W) x 42.5 mm (D)
	Weight	Approximately 10.3 oz. (377 g) with battery and hanger

Ordering Information
Model	Description	Buy Online	Price
2707B	BK Precision 2707B Tool Kit Digital Multimeter with Logic Probe		$91.00
Included Accessories
	1 - Test Leads 1 - 9 Volt Battery 1 - Instruction Manual 1 - Thermocouple Probe 1 - Magnetic Hanger	Included
Optional Accessories
TL2A	BK Precision TL 2A DELUXE TEST LEAD SET		$20.80
TL3	BK Precision TL 3 TIP KIT ACCESSORIES f/TL 2		$17.00
PR28A	BK Precision PR 28A 40kV HIGH VOLTAGE DMM PROBE		$62.00
TL130A	BK Precision TL 130A GENERAL PURPOSE DMM KIT		$42.00
LC29B	BK Precision LC 29B DMM CARRYING CASE		$17.75

BK Precision 2707B Tool Kit™ Digital Multimeter with Logic Probe

BK Precision 2707B
Tool Kit™ Digital Multimeter with Logic Probe