- Detects open, short, reversed, crossed, and split
- Clear LED display for the fault status
- Simple and effective to use
- Test cable length:
- Minimum 4ft (1.2m)
- Maximum 492ft (150m)
- Identify up to four different cables at one end by provided
remote identifiers
- Tests 10BaseT, 100BaseTx, 10Base2 (coax), RJ45, 356A, TIA-568A,
Tia-568B and Token Ring, etc.
|
 
|
|
B&K Precision 235 network cable tester is an easy and effective cable
tester which can test all the wiring faults of 10Base2 (Coax), 10BaseTx,
RJ45, 356A, TIA-568A, TIA-568B and Token Ring cables. It can identify
not only the wiring faults, such as open pairs, shorted pairs, reversed
pairs, crossed pairs and split pairs, but can also identify up to 4
different cables at one end.
A large flashing LED displays the fault code and the four pairs individual
LEDs tell you which pairs are tested. The remote identifiers are
provided to make a remote test. Just push the "TEST" switch.
It will automatically run all tests within a few seconds and show you
what faults are happened if they existed. It is simple and effective
use.
|
)
PDF Help