Avcom PSA-37XP
Portable Spectrum Analyzer
for Broadcast, CATV, & Satellite

• 1MHz to 4.2GHz Input
• 4 Resolution Bandwidths
• 50 User Screen Memories
• Direct Sunlight Readable LCD Screen
• Precision Rotary Encoder Tuning
• Independent Span and Resolution BW
• Readout Ku Band Offsets
• +13/18VDC LNB Power & 22kHz Switching
• Includes Car Charger
• Operates off 85-265VAC or 12VDC
• Long Life Li-Ion Battery Pack
• Compact and lightweight (only 11 lbs.)
• Available with built-in extender up to 7.5GHz

CATV Analyzer with Independent Span & Resolution Bandwidth
The PSA-37XP covers the whole CATV frequency range from 1 to 1100 MHz in addition to the Satellite L band from 950 to 2150 MHz. The unit has a ± 2 dB amplitude accuracy which makes this the perfect analyzer for the field technician or for testing and setting head-end levels. The variable span width makes it easy to either look at the whole band or pinpoint a particular frequency or channel.

No AC/No Problem
The built-in long life Li-Ion battery pack (and a built in charger) lets you work right at the antenna; no need for extension cords. You can also run or charge on vehicle or line power. THE PSA-37XP has a built in DC Block with +13/18 VDC & 22 KHz for powering LNAs and LNBs.

Satellite Dish Alignment a Snap
If you are doing DBS installs you need to be on and off the job fast! DBS signals such as DISH NETWORK and DIRECT-TV can be seen with Avcom’s PSA-37XP. Normal DBS antenna alignments, such as roof, wall, or backyard can be accomplished in seconds because the DBS receiver and TV monitor do not have to be at the antenna.

Creative Installations Made Easy
The PSA-37XP can really help with more creative DBS dish installations inside buildings, looking through sparse foliage or windows, smaller antennas, etc. When the signal is not optimum, using the PSA-37XP, the signal can be quickly located and measured even though it is below the receiver’s signal strength requirement.