|
<< Amprobe Wire & Cable Tracer
Amprobe LAN-1
Lan Cable Tester
|
- Test pin configuration for:
- 10/100 base -T cable
- 10 base-2 cable
- RJ45 modular cables
- AT&T 258A cable
- EIA / TIA 568A/568B cables
- Token Ring Cable
- Verify the cable wiring for continuity, opens, shorts or
incorrect wiring
- Test installed cable on wall plate or the patch panels by using
the Remote Termination module
- Perform Loopback Test or Remote Test
- Buzzer sound warning for error condition in cable
- Two sets of LED lights for Source and Test indication
- Maximum line length: > 300 meters
- Connector types: RJ45, BNC
|
 
Amprobe LAN-1 Shown
|
|
|
|
The Amprobe LAN-1 Cable Tester is designed for testing opens, shorts and
miswired cable installations. It is designed to work with various data
cables and connectors. This cable tester provides a quick go / no-go LED
display of the wiring and connection of item under test. You can either
step through the test cable wiring one at a time or have the unit
automatically pulse through the pin-outs and display the results. |
|
|
|
Specifications |
|
General Specifications |
|
Display |
18 LEDs: 9 Red and 9 Green, 9 LEDs on Remote module |
|
Battery |
Standard 9-volt battery, NEDA 1604A, JIS 006P, IEC
6F22 |
|
Battery life |
Approx 20 hours. (Alkaline battery) |
|
Low Battery Life |
The LED indicator will not turn ON when BATT button is pushed |
|
Operating Environment |
0 to 40°C (32 to 104°F), 10 to 70% RH |
|
Storage temperature |
-10 to 60°C (14 to 140°F), 10 to 90% RH |
|
Altitude |
2000m, indoor operation |
|
Dimension |
130 x 56 x 38 mm (5.1 x 2.2 x 1.5 in.) |
|
Weight |
1.26 kg (0.6 lb) |
|
Cable Continuity |
|
Maximum Line Length |
> 300 meters |
|
Connector Types |
RJ45, BNC |
|
|
|
)
PDF
Help