|
<< Amprobe Voltage & Continuity Indicators/Testers |
Amprobe VPC-30 & VPC-31
Voltage and Continuity Testers
|
| |
- Super-bright bi-Color LED’s indicates safe and dangerous voltages (above 55VDC or 30VAC)
- Auto hold feature - LED’s stay illuminated for 10 sec retaining a reading after the tests are disconnected
- Solenoid tester-like shaker to indicate AC voltage presence
- Automatically turns ON and OFF for easy and quick measurements
- Non-contact voltage detection and GFCI test feature for testing GFCI receptacles and breakers
- Standard detachable test lead (black) for easy replacement with optional longer or specialized probe
- Automatically selects AC Voltage, DC Voltage or Continuity
- LED’s indicate 10 levels of AC and DC Voltages::
- Volts (AC) 24, 48, 120, 208, 240, 277, 347, 480, 600, 1000
- Volts (DC) 6, 12, 24, 36, 48, 60, 72, 110, 220, 380
- Auto backlit LCD Digital Display for precise voltage measurements
- Continuity buzzer and Visual continuity indication (LED)
- Water and dust proof, IP65 design
|
 
Amprobe VPC-31 Shown
|
|
|
| |
| Specifications |
LCD Display
(VPC-31 only) |
3 digits 1000 counts
In an RF Field of
3V/m, total accuracy = Specified accuracy + 45d. Performance
above 3V/m is not specified |
| Update Rate |
5 per second nominal |
| Operating Temperature |
-10°C ~ 55°C (14°F ~ 131°F) |
| Relative Humidity |
Maximum relative humidity 80% for temperature
up to 31°C (87°F) decreasing linearly to 50% relative humidity
at 55°C (131°F) |
| Altitude |
Operating below 2000m |
| Storage Temperature |
-20°C ~60°C (-4°F ~ 140°F), < 80% R.H. (with
battery removed) |
| Temperature Coefficient |
Nominal 0.15 x (specified
accuracy)/ ºC @ (-10ºC ~ 18ºC or 28ºC ~ 55ºC), or otherwise
specified |
| Sensing |
Average sensing |
| Type of Protection |
IP65 |
| Pollution Degree |
2 |
| E.M.C. |
Meets EN61326-1:2006 (EN55022,
EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4,
, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11): For both
models: Performance is specified in an RF Field of 3V/m.
Performance above 3V/m is not specified. |
| Safety |
Meets EN61010-1 and IEC61010-1
2nd Edition (2001) |
| Measurement Category |
CAT III 1000V & CAT IV 600V AC &
DC |
| Transient Protection |
8kV lightning surge (1.2/50µs) |
| Overload Protection |
1000VDC & VAC rms |
| Low Battery |
Below approx. 2.4V |
| Power Supply |
Standard 1.5V AAA Size (NEDA 24G
or IEC R03) battery X 2; or 1.5V AAA Size (NEDA 24A or IEC LR03)
alkaline battery X 2 |
| Power Consumption (typical) |
3mA at Power-on ready; 30mA at
1000VAC full LED indication. 75mA at 1000VAC with shaker ON |
| APO Consumption (typical) |
10µA |
| APO Timing |
Idle for 30 seconds |
| DC & AC Voltage (LED) |
DCV MARKING |
Typical Threshold |
ACV MARKING |
Typical Threshold |
| 6V |
5V |
24V |
19V |
| 12V |
10V |
48V |
38V |
| 24V |
19V |
120V |
96V |
| 36V |
30V |
208V |
166V |
| 48V |
42V |
240V |
224V |
| 60V |
54V |
277V |
259V |
| 72V |
66V |
347V |
312V |
| 110V |
91V |
480V |
414V |
| 220V |
176V |
600V |
540V |
| 380V |
304V |
1000V |
800V |
| Input Impedance |
460k, 160pF nominal |
| ACV Frequency Response |
45Hz ~ 65Hz |
| Duty ratio |
Continuous duty |
| Audible Continuity |
| Open Circuit Voltage |
0.4VDC typical |
| Audible Threshold |
between 50k and 2000k |
| DC & AC Voltage |
Range |
Typical Threshold |
Accuracy |
| DC 999V |
> +5VDC or < -5VDC |
1.0%+2d |
| AC 999V (50Hz/60Hz) |
> 15VAC |
2.5%+4d |
| Input Impedance |
460k, 160pF nominal |
| Duty ratio |
Continuous duty |
|
|
|
| Ordering Information |
| Model |
Description |
Buy Online |
List Price |
| VPC30 |
Amprobe VPC-30 Voltage and Continuity Testers, LED Indicators only |
 |
Sale $41.95
(Reg. $49.95) |
| VPC31 |
Amprobe VPC-31 Voltage and Continuity Testers with LED Indicators and LCD Display |
|
Sale $70.95
(Reg. $83.95) |
| Included Accessories |
| |
- 1 - Bead Type
- 1 - Thermocouple with Banana Plug
- 1 - Test leads
- 1 - Carrying Case
- 1 - Instruction Manual
|
Included |
|
)
PDF Help