| Electrical Specifications |
| Function |
Range |
Accuracy |
| AC Voltage |
500.00 mV |
+/-(0.08% Rdg + 20 LSD) @ 45 to 300 Hz |
| 5.0000 / 50.000 / 500.00 / 1000.0 V |
| DC Voltage |
500.00 mV |
+/-(0.02% Rdg + 2 LSD) @ 0 to
50V |
| 5.0000 / 50.000 / 500.00 / 1000.0 V |
| Resistance |
500.00 Ohms |
+/-(0.07% Rdg + 2 LSD) @ 500
Ohms to 500 kOhms ranges |
| 5.0000 / 50.000 / 500.00 kOhms |
| 5.0000 / 50.00 0MOhms |
| AC Current |
500.00 / 5000.0 uA |
+/-(0.5% Rdg + 50 LSD) @ 50 and 60 Hz |
| 50.000 / 500.00 mA |
| 5.0000 / 10.000 A |
| DC Current |
500.00 / 5000.0 uA |
+/-(0.5% Rdg + 20 LSD) |
| 50.000 / 500.00 mA |
| 5.0000 / 10.000 A |
| Frequency |
5.0000 Hz to 200.000kHz |
+/-(0.002% Rdg + 4 LSD) |
| Capacitance |
50.00 / 500.0 nF |
+/-(2.0% Rdg + 3 LSD) @ 50 nF
to 50uF ranges |
| 5.000 / 50.00 / 500.0 / 9999uF |
| Temperature |
Dual thermocouple |
+/-(0.3% Rdg + 2°F) |
| -58°F to 1832°F |
+/-(0.3% Rdg + 1°C) |
| -50°C to 1000°C |
| Duty Cycle |
0.1% to 99.99% |
+/-(3 LSD / kHz + 3 LSD) |
| Diode Tester |
| Range |
5.0000V |
| Accuracy |
1%+1D |
Test Current (Typical) |
0.4mA |
| Open Circuit Voltage |
<3.5VDC |
| General Specifications |
| Display |
4-4/5 digits 50,000 counts.
Selectable stable mode 5-4/5 digits 500,000 counts for DC voltage, & 6 digits 999,999 counts for HZ |
| Polarity |
Automatic |
| Update Rate |
4-4/5 digits fast mode: 5 per
second nominal 5-4/5 digits stable mode: 1.25 Per second
nominal |
| 42 Segments Bar Graph |
60 per second max |
| Operating Temperature |
0°C to 45°C (32°F to 113°F) |
| Storage Temperature |
-20°C to 60°C (-4°F to 140°F), < 80% R.H.(With battery removed) |
| Temperature Coefficient |
Nominal 0.1 X (specified accuracy)/ °C @ (0°C -18°C or 28°C -- 40°C/32°F - 104°F), or otherwise specified |
| Relative Humidity |
Maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% relative humidity at 45°C |
| Altitude |
Operating below 2000m |
| Pollution Degree |
2 |
Terminals (To Com) Measurement
Category |
V / A / mAμA: Category III
1000 VAC & VDC and category IV 600 VAC & VDC |
| Overload Protections |
μA & mA: 1A/600V, IR 10kA or
better, F fuse A: 10A/600V, IR 100kA or better, F fuse
V: 1050VRMS, 1450VPEAK mV, e, & others: 600 VDC & VAC RMS |
| Power Supply |
Single alkaline 9V battery |
| Power Consumption |
6mA typical |
| Low Battery |
Below approx. 7V |
| Apo Timing |
Idle for 17 minutes |
| Apo Consumption |
30μA typical for am-160-a |
| Dimension |
12.5" x 7" x 3" inches/ 317.6
x 177.8 x 76.2mm (L x W x H) with clamshell |
| Weight |
1.4
lbs/635g with clamshell |