<< Amprobe
CatalogAmprobe GSD600
Gas Leak Detector for Methane and Propane
|
- Detects Methane and Propane gas
- Quickly identifies and pinpoints gas leaks
- Automatic calibration feature
- 5 level LED alarm: >40, >80, >160, >320, and >640 ppm
- Built-in earphone jack with mute function (earphone not included)
- Flexible probe to access difficult measurement areas
- Auto Power Off
|
 
Amprobe GSD600 Shown
|
|
|
|
The Amprobe GSD600 is a fast responding gas leak detector for methane and
propane gas. The meter emits a frequency tone when gas is detected. The
frequency of the beep coincides with the concentration of the gas. The LEDs
display the level of gas present in an area or room. Pinpoint gas leaks for
closed piping systems. Use the mute function in quiet work areas and utilize the
LED displays. Or a standard earphone jack for hearing the meter in loud
environments. |
|
|
|
Specifications |
|
General Specifications |
|
Sensor |
Semiconductor |
|
Response Time |
< 10 Seconds |
|
Warm up Time |
< 60 Seconds |
|
Operation Temp. Range |
-5°C ~ 45°C / 23°F ~ 113°F |
|
Auto Power Off |
10 minutes after last key pressure |
|
Power Supply |
(4) AA batteries; 9V power adaptor (plug
specifications: Outer diameter:3.5mm; Inner diameter: 1.35mm; Center
positive, 500mA maximum). (9V power adaptor not included) |
|
Battery Life |
14 hours (Continuous working) |
|
Minimum BAT. Voltage |
4.8V |
|
Probe Length |
447 mm (17.6 inches) |
|
Dimension |
175 x 70 x 38 mm / 6.89 x 2.75 x 1.50 in (LxWxD) |
|
Indicator |
Intermittent beep (Acoustic) / LED (Visual) |
|
Range |
Methane |
40 to 640 ppm |
|
Propane |
35 to 580 ppm |
|
Sensitivity |
35ppm (Propane) |
|
Advantage |
Fast response & High Methane sensitivity |
|
|
|
)
PDF Help