|
<< Amprobe Carbon Dioxide Meters |
Amprobe CO2-200 Wall-mounted CO2 Meter
|
|
|
- Super-Large LCD display with CO2 reading
- CO2 Measurement up to 9999 ppm, Temperature, Relative
humidity, Dew Point and Wet Bulb
- Super-Large LCD display with CO2 reading
- High performance low drift sensor designed with NDIR
(Non-Dispersive Infrared) waveguide technology with automatic
background calibration
- Audible alarm threshold setting to setup warning against
carbon dioxide level with output drive relay to control air flow
system
- Optional PC download capabilities (USB interface) Data Hold
- Recording of Maximum, Minimum and Average values with recall
function
|
 
Amprobe CO2-200 Shown
|
|
|
|
|
|
Instant feedback with CO2 levels, with additional temperature and humidity
measurement. Built in alarm warns against dangerous CO2 levels. The
portable Amprobe CO2-200 Wall-mounted CO2 Meter is designed to measure air
quality compliance in occupied spaces such as offices, production floors,
schools or hospitals. |
|
|
| Specifications |
| Measuring Range |
CO2 0 ~ 9999 ppm 2001 ~ 9999 ppm (out of
scale range) |
| Resolution |
1ppm - CO2 concentration, 0.1°C / °F - Temp,
0.1% RH - Humidity |
| Accuracy |
±75ppm ± 5% of reading (0 ~ 2000 ppm) Others
range accuracy are not specified |
| Temperature |
±0.6°C / ±0.9°F |
| Temp. Range |
-10°C to 60°C (14°F to 140°F) |
| RH Range |
0% ~ 95% |
| Accuracy |
±3% RH (at25°C, 10-90%) others ±5% for other
RH range |
| DP (Dew Point Temp.) |
-20°C to 59.9°C (-4°F to 139.8°F) |
| WB (Wet Bulb Temp.) |
-5.0°C to 59.9°C (23°F
to 139.8°F) |
| Warm-up Time |
30 seconds |
| Response Time |
About 30 seconds |
| Current Consumption |
< 50mA average, < 310mA peak current ( ~55ms) |
| Operating Condition |
0 ~ 50°C (32°F to 122°F), 0 ~ 95% RH (avoid
condensation) for CO2 |
| Storage condition |
-20°C to 60°C (-4°F to
140°F), 0~99%RH (avoid condensation) |
| Power Supply |
12 VDC adaptor |
| Dimension |
130(L) x 85(W) x 60(H) mm (5.1 x 3.3 x 2.4
in) |
| Weight |
Approx. 193g (0.43 lb) |
|
|
|