Test Equipment Depot Top Nav Bar
Test Equipment Depot - 800.517.8431 Free Ground Shipping Offer
<< Amprobe Digital AC Clamp Meters

Amprobe ACD-45PQ
600A Power Quality Clamp

Click here for a larger image of the Amprobe ACD-45PQClick here for larger image
Amprobe ACD-45PQ Shown
Product Information
Datasheet 246 KBPDF
PDF HelpPDF Help
  • TRMS sensing
  • Ultra slim jaws accommodate conductors up to 1.02” (26mm) in diameter
  • Measurements:
    • AC/DC Voltage up to 600V
    • AC Current up to 600A
    • Resistance
    • Frequency Power: Active (W)
    • Reactive (VAR) and Apparent (VA) Power with dual-display Power Factor readout
    • KWh Recording
  • AutoVA - Auto Selection of AC Volts, DC Volts or AC Amps
  • Peak hold
  • Data hold
  • 3 phase unbalanced load measurement – calculation of the discrete single phase measurements
  • Optional PC interface capability (RS-232 KIT2)
  • Audible continuity
  • Large, easy to read LCD display with backlight
  • Auto power off
  • Low battery indication
  • Voltage overload protection for all functions up to 600V AC/DC
 

The Amprobe ACD-45PQ is a compact clamp meter capable of measuring power, energy and power factor on a single and three-phase systems (balanced and unbalanced). Ultra slim jaw design allows the user to clamp around conductors in confined and difficult to reach places. Add on troubleshooting capabilities with an optional PC interface kit.

Specifications
Electrical
Specifications
Range Accuracy
AC Current 40.00 / 400.0 / 600 (1.0% Rdg + 5 LSD) @ 50 and 60Hz
AC Voltage 600.0V +/-(0.5% Rdg + 5 LSD) @ 50 and 60Hz
DC Voltage 600.0V +/-(0.5% Rdg + 5 LSD)
Resistance 999.9 Ohms +/-(1.0% Rdg + 6 LSD)
Frequency 5.00Hz to 500.0Hz +/-(0.5% Rdg +4 LSD)
Active Power (W) 0 to 360.0 kW +/-(2.0% Rdg + 6 LSD)
@ Harmonics Fund to 10th & PF 0.1 to 0.99
Reactive Power (VAR) 0 to 360.0 kVAR +/-(2.0% Rdg + 6 LSD)
@ Harmonics Fund to 10th & PF > 0.7
Apparent Power (VA) 0 to 360.0 kVA +/-(2.0% Rdg + 6 LSD) @ Harmonics Fund to 10th
Power Factor 0.10 to 0.99 +/- 3 LSD @ Harmonics Fund to 21th
General Specifications
Display Voltage functions: 6000 counts LCD display
Power Ohm & Hz functions: 9999 counts
LCD display ACA clamp-on function: 4000 counts LCD display
Update Rate Power function: 2 per second nominal
Voltage ACA clamp-on & Ohm functions: 2 per second nominal
Hz function: 1 per second nominal
Polarity Automatic
Low Battery Below approx. 2.4V
Operating Temperature 0°C to 40°C (32° to 104°F)
Relative Humidity Maximum relative humidity 80% for temperature up to 31°C (88°F) decreasing linearly to 50% relative humidity at 40°C (104°F)
Altitude Operating below 2000m
Storage Temperature -20°C to 60°C (-4° to 140°F), < 80% R.H. (with battery removed)
Temperature Coefficient Nominal 0.15 x (specified accuracy)/ °C @(0°C-18°C or 28°C -40°C) / (32° to 64°F or 82° to 104°F),or otherwise specified
Sensing True RMS sensing
Power Supply standard 1.5V AAA Size (NEDA 24A or IEC LR03) battery X 2
Power Consumption Voltage, ACA, Hz & Power functions: 11mA typical Ohm function: 5.5mA typical
APO Timing Idle for 30 minutes
APO Consumption 4μA typical
Dimension L266.7 x W177.8 x H81.28mm (10.5 x 7 x 3.2in)
Jaw Opening 26mm (1.0 in) max
Weight 224 gm approx 192 gm approx (0.42 lb)
Ordering Information
Model Description Buy Online List Price
ACD45PQ  Amprobe ACD-45PQ 600A Power Quality Clamp  Buy Now Sale $175.95
(Reg. $206.95)
Included Accessories
 
  • 1 - Users manual
  • 2 - Batteries
  • 1 - Test Leads
  • 1 - Carrying Case
Included
 

Amprobe Catalog   |  Amprobe Price List

$40.00 Minimum on Total Order