|
<< Amprobe Digital AC Clamp Meters |
Amprobe ACD-3300 IND
CAT IV Industrial True RMS Clamp Meter
|
|
|
- TRMS
- Measures AC Current up to 1000 ACA, Voltage up to 750 VAC 1000
VDC, Frequency, Resistance, Capacitance and Duty Cycle
- Temperature to 1832°F or 1000°C
- Peak Hold
- Audible continuity
- Auto and manual ranging
- Auto power off
- Data hold
- Backlight
- Diode Test
- Duty Cycle
- Bar-graph
- Accommodates conductors up to 2” (51mm) in diameter
- Safety CAT IV 600 V, CAT III 1000 V
|
 
Amprobe ACD-3300 Shown
|
|
|
|
|
|
The Amprobe ACD-3300 IND CAT IV 600V CAT III 1000V rated clamps for industrial applications
and utilities. CAT IV rating is required for any application where the
electrical wiring is located outside of the building, connecting
electrical system to the power transformer. Both meters are TRMS sensing
for accuracy and dependability of measurements. Large jaw accommodates
wide diameter wires. |
|
|
| Specifications |
| |
Ranges |
Accuracy |
| DC Volts |
Readings |
660.0 mV, 6.600 V, 66.00 V, 660.0
V, 1000 V |
± (0.5% rdg + 2 dgts) |
| Input impedance |
660 mV: >100 MΩ; 6.6 V:10 MΩ; 66
V to 1000 V: 9.1 MΩ |
| Overload protection |
1000 VDC or 750 VAC rms |
| AC Volts True RMS |
Readings |
Ranges |
Frequency |
Accuracy |
| 660.0 mV |
50 to 100 Hz |
± (1.5% rdg + 8 dgts) |
| 6.600V, 66.00V |
50 to 500 Hz |
± (1.5% rdg + 8 dgts) |
| 660.0V, 750V |
50 to 500 Hz |
± (1.5% rdg + 8 dgts) |
| Frequency: 10% to 100% of
voltage range |
50 to 1 kHz |
± (0.1% rdg + 5 dgts) |
| Peak Hold |
66.00V, 660.0V, 750V |
50 to 500 Hz |
± (3.0% rdg + 300 dgts) |
| AC coupled TRMS |
5% to 100% of range |
| Crest factor |
≤3 |
| Input impedance |
660 mV: >100 MΩ; 6.6 V:10 MΩ; 66
V to 1000 V: 9.1 MΩ |
| AC Current True RMS |
Readings |
Ranges |
Frequency |
Accuracy |
| 66.00A |
50 to 60 Hz |
± (2.0% rdg + 10 dgts) |
| 66.00A |
61 to 400 Hz |
± (3.0% rdg + 10 dgts |
| 660.0A |
50 to 60 Hz |
± (2.0% rdg + 10 dgts) |
| 660.0A |
61 to 400 Hz |
± (3.0% rdg + 10 dgts) |
| 1000 A |
50 to 60 Hz |
± (2.5% rdg + 10 dgts) |
| 1000 A |
61 to 400 Hz |
± (3.5% rdg + 10 dgts) |
| Frequency: 10% to 100% of current range |
50 to 1kHz |
± (0.1% rdg + 5 dgts) |
| Peak Hold |
66.00A, 660.0A, 1000A |
50 to 400 Hz |
± (3.0% rdg + 200 dgts) |
| AC Coupled TRMS |
Ranges |
5% to 100% of range |
| Crest factor |
≤ 3 |
| Input impedance |
660 mV: >100 MΩ; 6.6 V:10 MΩ; 66
V to 750 V: 9.1 MΩ |
| Overload protection |
1000 VDC or 750 VAC rms |
|
|
|
)
PDF Help