 |
 |
|
||||||
| Test Equipment Catalog | Specials | Repair | Surplus | Ordering/Contact Info |
|
|
|
|
|
|
||||||
| Test Equipment Catalog | Specials | Repair | Surplus | Ordering/Contact Info |
|
|
| << Ametek Catalog << Ametek Signal Calibrators |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ametek CSC200G | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The CSC200 is a temperature signal calibrator; it is designed to source
and read RTDs, TCs, Resistance, and mV for temperature signal
calibration. This unit is a handy calibrator that can meet applications
such as simulating a temperature sensor, measuring temperature with a
sensor, and checking the sensor output. The CSC200 is not simply a
calibrator but an effective troubles-hooting and test device. This
versatile instrument was designed for calibration and validation of
temperature sensors but that does not mean that you will not find other
applications for this unit. For example, you can combine the CSC200 with
a Ametek dry-block calibrator for a portable onsite calibration system. This instrument makes the job easy by utilizing a thermocouple plug for easy connection and can work with 2, 3, or 4-wire RTDs. The CSC200 also offers features such as user-defined set points with a recall function, selectable cold junction compensation, and installed curves for 14 RTD and 13 TC types. These handy time savers are combined in a package offering an easy-to-read, two line display and an intuitive keypad with a knob for fine adjustments. This calibrator is more than a simple tool but it is as straightforward as any device that you have in your toolbox. The CSC200 signal calibrator offers you the accuracy and features that you need in a convenient, compact, and easy-to-use package. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Set and Recall operation The CSC200 offers you a timesaving feature that is not offered amongst lesser calibrators. You can store up to 3 test points for each of the TC and RTD functions. This means that there is no need to repeatedly set each value for your test needs; just store the set points for your test and call them up for each sensor. The Recall button is your “hot key” to retrieve the stored values in sequential order. If you have several types of sensors in your process, the CSC200 makes it easy because you can store set values for each type. These values are stored in a non-volatile memory location so you only need to set the values once and they are there for your use any time that you need them.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Auto shutdown The CSC200 offers an automatic shutdown feature. This power saving feature turns the calibrator off after it has been idle for a specified period of time. The time delay is factory set to 30 minutes; however, you can adjust the time to meet your needs. Large display The CSC200 features a large two-line display. The upper line shows the measured or sourced temperature, resistance, or mV value. The second line indicates the type of sensor. The display also features several icons to allow for quick recognition of the status of the unit. CSC200 in soft case All Ametek handheld calibrators are supplied in a handy soft case that allows for operation while in the case. The convenient internal storage pocket offers the space for test leads and accessories. Dry-block calibrators You may use the CSC200 in conjunction with your Ametek or other dry-block calibrators. This calibrator will allow you to make full use of your dry-block or calibration bath by offering you the ability to locally read your sensor-under-test. You can easily read the sensor-under-test and record the values, compare the reading with a remote read-out device, or be sure that remote alarms are operating as needed. Ametek features three families of dry-block calibrators that do not offer the ability to directly read an instrument-under-test. These portable calibrators do feature easy operation, multiple functions directly on the keypad, stable and accurate readings, and portability for on-site testing; just the type of instrument that you need for your temperature calibration and testing. When combined with the CSC200, you have no need for any other test equipment. Reference probes You may need to use a reference probe for validation of your dry-block or calibration bath performance. Use the CSC200 to read a Ametek reference probe to ensure that you have the proper temperature for your test point. The system accuracy of the CSC200 with a Ametek reference probe is the stated accuracy for the reference probe type plus the accuracy of the probe. Constants for the probe cannot be entered. If you already have a Ametek STS Series reference probe, you will need to verify that you have babana jacks on the termination. If not, we offer a connection cable that you can easily plug into your probe to convert to banana jacks. Ametek features a series of dependable, accurate, and stable reference probes: the STS Series. These probes are proven to be reliable instruments for verifying the temperature in a dry-block calibrator or calibration bath. They are available with banana jack connectors allowing for an easy use with your CSC200; just plug in the probe, select the instrument type, and read the temperature. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ametek Catalog | Ametek Price List
$40.00 Minimum on Total Order
Copyright © Fotronic Corporation
All Rights Reserved
)
