<< Ametek Compact Pressure Calibrator Index
Ametek CPC010CINDG
Compact
Pressure Calibrator, Vacuum to 0.7 bar (10 psi)
Calibrator Indicator Only |
- Easy-to-read dual line LCD display that indicates
pressure and mA (loop signals) and percent of full scale
simultaneously.
- Store peak values (upper and lower).
- Single button zeroing.
- Ideal for on-site use: Complete ready-to-use calibration
systems in one carrying case or as individual indicators.
- One hand operation: No need for a flat surface to operate
the system
- High flexibility: The calibration system can easily be
disassembled so the indicator can be used separately for
pressure monitoring tasks.
- Transmitter loop: Measure the transmitter loop current up
to 24mA (125%) and the pressure at the same time.
- Easy pressure switch test.
- Record min. and maximum readings.
- Easy recalibration of the unit.
- Temperature compensation: ±0.005% F.S. /°C outside 18 to
28°C (±0.003% F.S. /°F outside 64 to 82°F).
- Overload maximum pressure +50% Full Scale.
- Media compatibility Non-corrosive gasses and liquids.
- Connection 1/8 in. NPT female - see delivery section for
adapters.
- Min/Max Peak hold capture 50 milliseconds
mA input 0 to 24 mA accuracy: ±0.015% of reading +2 µA.
|
 
Ametek CPC010CINDG
Shown
|
|
|
The Ametek CPC series is recognized by its high quality and carefully
selected features that save time and make calibration tasks easy to
per-form; e.g. dual information display, 17 different pressure units,
transmitter mA reading, min/max recording, peak reading, and
semi-automatic pres-sure switch test finding the closing, opening and
the hysteresis pressure (dead band).
Maintenance of the instrument is made easy. Recalibration of the unit
can be performed locally with an accurate pressure reference: No need to
send the unit back to the manufacturer for re-calibration. For all systems
the pump and the indicator are separate so replacement of the pump does
not mean that you have to send the complete system for repair.
The Ametek CPC010CINDG can be delivered as an individual indicator or as a
complete calibration system ready for use in a carrying case, including
pump, hose, connectors, battery, test leads, user manual, and traceable
calibration certificate.
This system includes the Ametek APC calibrator together with one of the
following pneumatic hand pumps: T-730, T-740 or T-750, depending on the
chosen pressure range. System A is an easy-to-use single hand operated
calibration system. No need for a flat surface to operate the system -
just hold it in your hand.
The
CPC010CINDG comes in an aluminum carrying case with cutouts for
fittings, hose, and the complete assembled calibration unit - no time is
required to assemble the unit every time you need it. The calibrator
(indicator) can at any time be used separately for other pressure test
tasks. A special quick connector between the pump and the indicator
makes it possible to separate the system in seconds and to swivel the
indicator for easy viewing.
The Ametek APC delivery always includes a protective softcase for the
indicator. All APC indicators used with the
CPC010CINDG are delivered calibrated
in both pressure and vacuum. |
|
Button Functions |
Details |
|
Clear dual line display |
Large digits display the pressure, icons show
current status and mode, and the smaller digits show
device-under-test conditions. |
|
Electrical connections |
The CPC indicator have inputs for mA readings
for pressure switches and transmitters. |
|
ON / OFF |
Auto shut-off to extend battery life
(user programmable) |
|
mA% |
Switches the mA numeric display between
mA and percentage of range. |
|
Switch test |
Turns on the switch test mode. Hold to
clear previous test. |
|
Units |
Easy access to 17 different pressure
engineering units. Press and hold while unit is powering up
to change the power saver setting. |
|
Zero |
Keep the high accuracy: ZERO the
instrument before every test. |
|
Serial interface |
Serial interface to communi-cate with a
PC (terminal). Also used if adjustment of the unit is
necessary. |
|
Max / Min |
Reads the highest and lowest pressure
value since the last reset the CPC. Monitor a safety valve
or look for pressure spikes in the process. |
|
Pressure connections |
1/8 in NPT female. |
|
|
|
Dedicated switch test function
All CPC models have a time saving semi automatic pres-sure switch
test. The instrument records the closing and opening pressure for
the switch. The CPC can also be used to monitor a certain
measurement point in the process and display the minimum and maximum
value. This feature can be very helpfull when checking pressure
spikes around valves.
JOFRACAL Calibration Software
The JOFRACAL calibration software ensures easy calibration of RTD´s,
thermocouples, transmitters, thermoswithes, pressure gauges and
pressure switches. JOFRACAL can be used with Ametek DPC-500, APC, CPC
and IPI pres-sure calibrators, all Ametek temperature calibrators, as
well as Ametek AMC900, ASC300 multi signal calibrator and ASM-800
signal multi scanner.
|
Requirements |
Details |
Minimum Requirements:
Hardware |
- Intel Pentium II 1.4
GHz Processor
- 64MB Ram (128MB
recommended)
- Standard VGA (800x600,
256 colors). 1024x768 Recommended
- CD-Rom Drive for
installation of program
- 1 or 2 free RS-232
serial ports, depending on configurations
|
Minimum Requirements:
Software |
- Microsoft Windows 98,
Microsoft Windows NT 4.0, Microsoft Windows 2000,
- Microsoft Windows ME,
Microsoft Windows XP, Windows Vista\
- System fonts: MS
Sans Serif, Arial
|
|
Calibration Software: |
View
PDF |
JOFRACAL calibration software may also be used for manual
calibrations, as it can be set up to accept manual entry of
calibration data together with other liquid baths, ice points or
dry-block heat sources. The calibration data collected may be stored
on a PC for later recall or analysis. The ITC calibrator stores the
calibration procedure and may be taken out to the process site
without using a personal computer. Once all calibrations are
completed, the data may be uploaded to the JOFRACAL calibration
software for post-processing and printing of certificates. The
calibration data collected may be stored on the personal computer
for later recall or analysis.
|
|
|
|
Specifications |
|
Mains
specifications |
|
Pressure range |
Bar |
vacuum to 0.7 |
|
Psi |
vacuum to 10 |
|
Ranges |
Metric/Imperial |
|
Detailed Indicator Pressure Ranges Chart
>> |
|
Engineering units (built-in) |
User selectable: 17 Units |
psi, bar, mbar, kg/cm2, inH2O @ 4°C, inH2O
@20°C, inH2O @60°C, mH2O @4°C, mH2O @20°C, cmH2O@4°C, cmH2O
@20°C, ftH2O @4°C, ftH2O @20°C, ftH2O@60°C, inHg @0°C, mmHg
@0°C, kPa |
|
Pressure accuracy |
Accuracy positive pressure |
±0.05% of F.S. |
|
Accuracy vacuum |
±0.1% F.S |
|
Temperature compensation |
±0.005% F.S. /°C outside
18 to 28°C |
| ±0.005% F.S. /°C outside
18 to 28°C |
|
Additional Notes |
F.S. Full Scale is the numerical value of the
positive pressure range. The accuracy includes
non-linearity, hysteresis, repeat-ability and temperature
effect 18 to 28°C / 64 to 82°F.
All above specifications are specified at 23°±3°C / 73°±6°F
unless otherwise noticed. |
|
Media
compatibility |
Non-corrosive gasses and
liquids |
|
Input /
output |
Min/Max Peak
hold capture |
50 milliseconds |
|
mA input |
0 to 24 mA accuracy
±0.015% of reading +2 µA |
|
Switch test |
Supply max. 9 V |
|
Resolution |
1° or 0.1° |
|
Accuracy |
±0.25°C /
±0.45°F |
|
Radial homogeneity
(difference between holes) |
0.04°C /
0.07°F |
|
Immersion depth |
150 mm / 5.91
in |
|
Well diameter |
30 mm / 1.18
in |
|
Switch input |
Test voltage |
Maximum 5 VDC |
|
Test current |
Maximum 2.5 mA |
|
Temperature range |
|
Range |
33 to 320°C / 91 to 608°F |
|
Heating time |
50 to 320°C / 122 to 608°F |
7 minutes |
|
Cooling time |
320 to 100°C / 608 to 212°F |
30 minutes |
|
320 to 50°C / 608 to 122°F
|
60 minutes |
|
Miscellaneous |
|
Temperature |
Operating |
-10°C to 50°C / 14°F to 122°F |
|
Storage |
-20°C to 60°C / -4°F to 140°F |
|
CE conformity |
EN50082-1, 1992 and EN55022, 1994 Class B |
|
Safety |
CSA C22.2 No. 1010.1, 1992 |
|
Physical |
|
Instrument |
Weight |
400 g / 14.1 oz |
|
Size (L x W x
H) |
188 x 84 x 52 mm / 7.37 x 3.31 x 2.05 in |
|
Display |
Type |
Dual information LCD plus icon indicators |
|
Update Rate |
Twice per second |
|
RS232
communication interface |
Connector |
Stereo Jack |
|
Serial |
0-5 VDC, 9600 baud, 8 data, no parity, 1 stop
|
|
Protocol |
ASCll command language |
|
Pressure
|
Connection |
1/8 in. NPT female |
|
Overload |
Max. Pressure |
+50% F.S. |
|
"OL"
Activation |
+20% F.S. |
|
Power Supply |
Battery |
9V Alkaline (x1) |
|
Battery Life |
Min. 15 Hours |
|
Low battery indicator |
When remaining power reaches 7V |
|
|
|
|
Ordering Information |
| Model |
Description |
Buy Online |
Price |
| CPC010CINDG |
Ametek CPC010CINDG Compact Pressure Calibrator, Vacuum to 0.7 bar (10 psi), Calibrator Indicator Only |
 |
Sale $1,182.75
(Reg. $1,245.00) |
| Included Accessories |
| |
- 1 - Traceable calibration certificate (NIST) With pressure
and vacuum performance
- 1 - 9 V Battery
- 1 - Converter to 1/4 in NPT female
- 1 - Converter to 1/4 in BSP female
- 1 - Test leads; red and black
- 1 - Connection cable for RS232
- 1 - JOFRACAL calibration software
- 1 - Soft carrying case
- 1 - User manual
|
Included |
|
)
