|HOME > AMETEK > PRESSURECALIBRATION > APC10KGFWBG|
The Ametek APC10KGFWBG are the latest in the new generation of AMETEK
handheld pressure calibrators. This series was designed to meet high
accuracy pressure calibration applications and to make your tasks
easier. The APC10KGoffers features such as dual information display, 17
different pressure units, transmitter supply, scalable mA input for %
error calculation, serial communications, and external pressure module
capability. The accuracy of the APC10KGFWBG is deadweight caliber
throughout the range and is temperature compensated for operation in
controlled or in process applications. This is a truly superior pressure
The APC10KGFWBG is an easy-to-use calibration system. The hydraulic pump makes it very easy to prime the system. The pump contains 75 in3 / 1.23 l of liquid. The system includes a manifold for connection of two test devices and the fine adjustment vernier valve is standard. The System F comes in a protective carrying case with cutouts for fittings. Easy and fast connection between pump and calibrator makes it easy to use the pressure calibrator separately for other pressure test tasks.
T pump is designed for high pressure applications. The pump may be
ordered with either oil or a water/alcohol mixture as the pressure
medium. The pump is constructed of 300 series stainless steel and Monel
allowing for the use of other hydraulic media. Three seal packages are
available for the system: Buna-N, Viton®, and EPT. 1) The Type T pump
features a dual pressure output mani-fold, fine adjustment vernier
valve, relief valve, and dual volume control for rapid pressure increase
at lower pres-sures and easier pumping at higher pressures.
The Ametek APM series of pressure modules extends the application base
for the APC10KGFWBG by allowing for calibrations in ranges other than
those of the indicator; and at a lower cost than purchasing another
APC03KG. The APM modules are also compatible with several other Ametek
Calibration of the instrument may be performed locally without returning the APC-10KGunit to the manufacturer. Everything needed is an accurate pressure reference. If a factory calibration is require, the pump and indicator are independent and only the indicator needs to be returned.
JOFRACAL Calibration Software
The JOFRACAL calibration software ensures easy calibration of RTD´s, thermocouples, transmitters, thermo switches, pressure gauges and pressure switches. JOFRACAL can be used with Ametek DPC-500, APC, CPC and IPI pres-sure calibrators, all Ametek temperature calibrators, as well as Ametek AMC900, ASC300 multi signal calibrator and ASM-800 signal multi scanner.
JOFRACAL calibration software may also be used for manual
calibrations, as it can be set up to accept manual entry of
calibration data together with other liquid baths, ice points or
dry-block heat sources. The calibration data collected may be stored
on a PC for later recall or analysis. The ITC calibrator stores the
calibration procedure and may be taken out to the process site
without using a personal computer. Once all calibrations are
completed, the data may be uploaded to the JOFRACAL calibration
software for post-processing and printing of certificates. The
calibration data collected may be stored on the personal computer
for later recall or analysis.