|HOME > AMETEK > PRESSURECALIBRATION > APC05KGDOXG|
The Ametek APC05KGDOXG are the latest in the new generation of AMETEK
handheld pressure calibrators. This system consists of an APC calibrator
together with a rugged, hydraulic, high pressure pump.
The Ametek APC05KGDOXG is an easy-to-use calibration system. The hydraulic pump makes it very easy to prime the system. You can adjust the indicator to fit the best viewing angle. The system includes a manifold for connection of two test devices and the fine adjustment vernier valve is standard.
The Ametek APC05KG-DOXG comes in an aluminum carrying case with cutouts for fittings and the complete assembled calibration unit - no time adder to assemble the unit every time. Easy and fast connection between pump and calibrator makes it easy to use the pressure calibrator separately for other pressure test tasks. The Ametek APM series of pressure modules extends the application base for the APC05KG DOXG by allowing for calibrations in ranges other than those of the indicator/
The APC05KGDOXG consists of an APC calibrator together with a hydraulic, high pressure hand pump T-620 or T-620H, which features an oil reservoir to prime the system. The APC05KGDOXG is an easy-to-use single hand-operated calibration system. No need for a flat surface (table) to operate the system. The system includes release valve and vernier valve for fine adjustment to enable safe and simple operation of the pump.
The APC05KG-DOX-G comes in an aluminum carrying case with cutouts for fittings, hose, and the complete assembled calibration unit - no time adder to assemble the unit every time. Easy and fast connection between pump and calibrator makes it easy to use the pressure indicator separately for other pressure test tasks.
JOFRACAL Calibration Software
The JOFRACAL calibration software ensures easy calibration of RTD´s, thermocouples, transmitters, thermo switches, pressure gauges and pressure switches. JOFRACAL can be used with Ametek DPC-500, APC, CPC and IPI pressure calibrators, all Ametek temperature calibrators, as well as Ametek AMC900, ASC300 multi signal calibrator and ASM-800 signal multi scanner.
JOFRACAL calibration software may also be used for manual
calibrations, as it can be set up to accept manual entry of
calibration data together with other liquid baths, ice points or
dry-block heat sources. The calibration data collected may be stored
on a PC for later recall or analysis. The ITC calibrator stores the
calibration procedure and may be taken out to the process site
without using a personal computer. Once all calibrations are
completed, the data may be uploaded to the JOFRACAL calibration
software for post-processing and printing of certificates. The
calibration data collected may be stored on the personal computer
for later recall or analysis.