|HOME > AMETEK > PRESSURECALIBRATION > APC030CINDG|
The Jofra APC Calibrators are the latest in the new generation of AMETEK
handheld pressure calibrators. This series was designed to meet high
accuracy pressure calibration applications and to make your tasks
easier. The APC10KGoffers features such as dual information display, 17
different pressure units, transmitter supply, scalable mA input for %
error calculation, serial communications, and external pressure module
capability. The accuracy of the APC calibrators is deadweight caliber
throughout the range and is temperature compensated for operation in
controlled or in process applications. This is a truly superior pressure
The Ametek APM series of pressure modules extends the application base for the APC calibrators by allowing for calibrations in ranges other than those of the indicator; and at a lower cost than purchasing another APC. The APM modules are also compatible with several other Ametek calibrators.
Calibration of the instrument may be performed locally without returning the APC unit to the manufacturer. Everything needed is an accurate pressure reference. If a factory calibration is require, the pump and indicator are independent and only the indicator needs to be returned.
JOFRACAL Calibration Software
The JOFRACAL calibration software ensures easy calibration of RTD´s, thermocouples, transmitters, thermoswitches, pressure gauges and pressure switches. JOFRACAL can be used with Ametek DPC-500, APC, CPC and IPI pres-sure calibrators, all Ametek temperature calibrators, as well as Ametek AMC900, ASC300 multi signal calibrator and ASM-800 signal multi scanner.
JOFRACAL calibration software may also be used for manual
calibrations, as it can be set up to accept manual entry of
calibration data together with other liquid baths, ice points or
dry-block heat sources. The calibration data collected may be stored
on a PC for later recall or analysis. The ITC calibrator stores the
calibration procedure and may be taken out to the process site
without using a personal computer. Once all calibrations are
completed, the data may be uploaded to the JOFRACAL calibration
software for post-processing and printing of certificates. The
calibration data collected may be stored on the personal computer
for later recall or analysis.