<< Ametek Advanced Pressure Calibrator Index
Ametek APC030CAVXG
Advanced Pressure Calibrator, Vacuum to 2 bar (30 psi),
Discontinued |
- Low Temperature, High Temperature and IR models available
- Multiple block configurations available
- Accuracy of +/-0.05°C
- Auto-stepping-user programmable
- JOFRACAL Software for documentation/storage of date
- Complete series of temperature and IR calibrators
- Multi-hole well design
- Multi information display
- Auto stepping
- Stability indicator
- Count down timer (shows when unit is stable)
- Programmable maximum temperature
- Fast simulation/training mode
- Re-calibration from keyboard
|
 
Ametek APC030CAVXG
Shown
|
|
|
The Ametek APC030CAVXG are the latest in the new generation of AMETEK
handheld pressure calibrators. This series was designed to meet high
accuracy pressure calibration applications and to make your tasks
easier. The APC03C offers features such as dual information display, 17
different pressure units, transmitter supply, scalable mA input for %
error calculation, serial communications, and external pressure module
capability. The accuracy of the APC030CAVX/G is deadweight caliber
throughout the range and is temperature compensated for operation in
controlled or in process applications. This is a truly superior pressure
calibrator.
The Ametek APM series of pressure modules extends the application base
for the APC030CAVXG by allowing for calibrations in ranges other than
those of the indicator; and at a lower cost than purchasing another
APC030C. The APM modules are also compatible with several other Ametek
calibrators.
Calibration of the instrument may be performed locally without returning
the APC03C unit to the manufacturer. Everything needed is an accurate
pres-sure reference. If a factory calibration is require, the pump and
indicator are independent and only the indicator needs to be returned. |
|
|
|
Options |
Details |
|
Clear dual line display |
Large digits display the
pressure, icons show current status and mode, and the
smaller digits show device-under-test conditions. |
|
mA/% |
Save time and effort in calculating the error
between the APC and the device-under-test by entering the
pressure range corresponding to 4-20mA. This gives immediate
read-out of the error in %.You can also read mA or % of
4-20mA in the display. |
|
Electrical connections |
The APC indicator have inputs
for mA readings for pressure switches and transmitters,
including 24 VDC supply, and for external Ametek APM pressure
modules. |
|
ON / OFF |
Auto shut-off to extend battery
life (user programmable). |
|
Switch Type |
Perform semi-automatic pressure switch tests.
The APC records the “close” and “open” pressure values and
calculates the hysteresis (deadband). You change the
pressure and the APC does the rest |
|
MAX/MIN |
Reads the highest and lowest pressure value
since you last reset the APC. Monitor a safety valve or look
for pressure spikes in the process. |
|
Pressure connections |
1/8 in NPT female 15 bar (200
psi) and below.
1/8 in NPT male for 35 bar (500 psi) and above. |
|
Units |
Easy access to 17 different
pressure engineering units. |
|
Serial interface |
Serial interface to communicate with a PC
(terminal). Also used if adjustment of the unit is
necessary. |
|
Zero |
Keep the high accuracy: ZERO the instrument
before every test. |
|
|
|
JOFRACAL Calibration Software
The JOFRACAL calibration software ensures easy calibration of RTD´s,
thermocouples, transmitters, thermo switches, pressure gauges and
pressure switches. JOFRACAL can be used with Ametek DPC-500, APC, CPC
and IPI pressure calibrators, all Ametek temperature calibrators, as
well as Ametek AMC900, ASC300 multi signal calibrator and ASM-800
signal multi scanner.
|
Requirements |
Details |
Minimum Requirements:
Hardware |
- Intel Pentium II 1.4
GHz Processor
- 64MB Ram (128MB
recommended)
- Standard VGA (800x600,
256 colors). 1024x768 Recommended
- CD-Rom Drive for
installation of program
- 1 or 2 free RS-232
serial ports, depending on configurations
|
Minimum Requirements:
Software |
- Microsoft Windows 98,
Microsoft Windows NT 4.0, Microsoft Windows 2000,
- Microsoft Windows ME,
Microsoft Windows XP, Windows Vista\
- System fonts: MS
Sans Serif, Arial
|
|
Calibration Software: |
View
PDF |
JOFRACAL calibration software may also be used for manual
calibrations, as it can be set up to accept manual entry of
calibration data together with other liquid baths, ice points or
dry-block heat sources. The calibration data collected may be stored
on a PC for later recall or analysis. The ITC calibrator stores the
calibration procedure and may be taken out to the process site
without using a personal computer. Once all calibrations are
completed, the data may be uploaded to the JOFRACAL calibration
software for post-processing and printing of certificates. The
calibration data collected may be stored on the personal computer
for later recall or analysis.
Ametek APM module
The Ametek APM external pressure modules extend the range of the
Ametek APC03-C-AVX-G. There are more than 60 models available with gauge,
absolute, differential, and vacuum pressure references and in metric
and imperial engineering units. The modules are engineered for
in-plant, field, or laboratory use. They are ready-to-use with the Ametek APC and the protocol allows for immediate recognition and use
of the module once plugged into the calibrator.
|
|
|
|
Specifications |
|
Mains
specifications |
|
Pressure range |
Bar |
vacuum to 0.7, 2, 15, or 35 bar |
|
0 to 70, 200, 350, 700 |
|
Psi |
vacuum to 10, 30, 200, or 500psi |
|
0 to 1,000, 3,000, 5,000, 10,000 |
|
Ranges |
Metric/Imperial |
|
Detailed Indicator Pressure Ranges Chart
>> |
|
Engineering units (built-in) |
User selectable: 17 Units |
psi, inH2O@4°C, inH2 O@20°C, inH2 O@60°F,
inHg@0°C, ftH2 O@4°C, ftH2O@20°C, ftH2O@60°F, bar, mbar, kPa,
kg/cm 2, cmH 2O@4°C, cmH2O@20°C, mH2O@4°C, mH2 O@20°C,
mmHg@0°C |
|
Pressure accuracy |
Pressure |
±0.04% rdg + 0.01% F.S. |
|
Full
temperature compensation |
0 to 50°C / 32 to 122°F |
|
Vacuum (10 psi
/ 0.7 bar indicator) |
±0.1% F.S. |
|
Vacuum (30,
200 psi / 2, 15 bar indicator) |
±0.05% F.S. |
|
Full
temperature compensation |
10 to 45°C / 50 to 113°F |
|
Media
compatibility |
Non-corrosive gasses and
liquids |
|
Input /
output |
Min/Max Peak
hold capture |
50 milliseconds |
|
mA range |
0 to 24 mA |
|
mA accuracy |
±0.015% rdg +2 µA |
|
Transmitter
supply |
24 VDC |
|
Switch test |
Supply max. 9 V |
|
Physical |
|
RS232
communication interface |
Connector |
Stereo Jack |
|
Serial |
0-5 VDC, 9600 baud, 8 data, no parity, 1 stop
|
|
Protocol |
ASCll command language |
|
Pressure Connection |
Indicators 200 psi /
15 bar and below |
1/8 in. NPT female |
|
Indicators 500 psi /
35 bar and above |
1/8” NPT male |
|
Pressure
Overload |
Max. Pressure |
+50% F.S. |
|
"OL"
Activation |
+20% F.S. |
|
Hand Pump Specifications |
|
Pressure range |
T-750 |
-0.850 to 0 bar / -25 to 0 in Hg |
|
Test media |
Air |
|
Wetted parts |
Aluminum, brass, stainless, Stainless steel,
nylon, Nylatron GS |
|
Connections to test objects |
0.6 m / 24 in hose with 1/4” BSP and NPT
female connector |
|
|
|
|
Ordering Information |
| Model |
Description |
Buy Online |
Price |
| APC030CAVXG |
Ametek APC030CAVXG Advanced Pressure Calibrator Indicator - Vaccum to 30 psi(2 bar) w/ T-750 Hand Pump |
Discontinued |
| Included Accessories |
| |
- 1 - Traceable calibration certificate (NIST)
- 1 - With pressure and vacuum performance
- 1 - 9V battery
- 1 - Adapter to 1/4” NPT female from 1/8” NPT
- 1 - Adapter to 1/4” BSP female from 1/8” NPT
- 1 - Test leads: red and black
- 1 - Connection cable for RS232
- 1 - JOFRACAL calibration software
- 1 - Soft case and shoulder strap
- 1 - User manual
- 1 - Pump T-750
- 1 -Hose 24 in / 0.6 m with 1/4” BSP and NPT female connector
- 1 -Quick connector between pump and indicator
- 1 -roll of teflon tape
- 1 -Aluminum carrying case
- 1 -Fitting to go from the quick connector on the indicator to
1/4” BSP or NPT female (when using the indicator as a gauge in the
process)
|
Included |
|
)
