Ametek APC01KGINDG
Advanced Pressure Calibrator, 0 to 70 bar (1,000 psi)

Requirements	Details
Minimum Requirements: Hardware	Intel Pentium II 1.4 GHz Processor 64MB Ram (128MB recommended) Standard VGA (800x600, 256 colors). 1024x768 Recommended CD-Rom Drive for installation of program 1 or 2 free RS-232 serial ports, depending on configurations
Minimum Requirements: Software	Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000, Microsoft Windows ME, Microsoft Windows XP, Windows Vista\ System fonts: MS Sans Serif, Arial
Calibration Software:	View PDF

JOFRACAL calibration software may also be used for manual calibrations, as it can be set up to accept manual entry of calibration data together with other liquid baths, ice points or dry-block heat sources. The calibration data collected may be stored on a PC for later recall or analysis. The ITC calibrator stores the calibration procedure and may be taken out to the process site without using a personal computer. Once all calibrations are completed, the data may be uploaded to the JOFRACAL calibration software for post-processing and printing of certificates. The calibration data collected may be stored on the personal computer for later recall or analysis.

Ametek APM module
The Ametek APM external pressure modules extend the range of the Ametek APC. There are more than 60 models available with gauge, absolute, differential, and vacuum pressure references and in metric and imperial engineering units. The modules are engineered for in-plant, field, or labora-tory use. They are ready-to-use with the Ametek APC and the protocol allows for immediate recognition and use of the module once plugged into the calibrator.

Specifications
Mains specifications
Pressure range	Bar	vacuum to 0.7, 2, 15, or 35 bar
		0 to 70, 200, 350, 700
	Psi	vacuum to 10, 30, 200, or 500psi
		0 to 1,000, 3,000, 5,000, 10,000
	Ranges	Metric/Imperial
		Detailed Indicator Pressure Ranges Chart >>
Engineering units (built-in) User selectable: 17 Units		psi, inH2O@4°C, inH2 O@20°C, inH2 O@60°F, inHg@0°C, ftH2 O@4°C, ftH2O@20°C, ftH2O@60°F, bar, mbar, kPa, kg/cm 2, cmH 2O@4°C, cmH2O@20°C, mH2O@4°C, mH2 O@20°C, mmHg@0°C
Pressure accuracy	Pressure	±0.04% rdg + 0.01% F.S.
	Full temperature compensation	0 to 50°C / 32 to 122°F
	Vacuum (10 psi / 0.7 bar indicator)	±0.1% F.S.
	Vacuum (30, 200 psi / 2, 15 bar indicator)	±0.05% F.S.
	Full temperature compensation	10 to 45°C / 50 to 113°F
Media compatibility		Non-corrosive gasses and liquids
Input / output	Min/Max Peak hold capture	50 milliseconds
	mA range	0 to 24 mA
	mA accuracy	±0.015% rdg +2 µA
	Transmitter supply	24 VDC
	Switch test	Supply max. 9 V
Physical
Display	Type	Dual information LCD plus icon indicators
	Update Rate	Twice per second
RS232 communication interface	Connector	Stereo Jack
	Serial	0-5 VDC, 9600 baud, 8 data, no parity, 1 stop
	Protocol	ASCll command language
Pressure Connection	Indicators 200 psi/15 bar and below	1/8 in. NPT female
	Indicators 500 psi/35 bar and above	1/8” NPT male
Pressure Overload	Max. Pressure	+50% F.S.
	"OL" Activation	+20% F.S.