<< Agilent Catalog
<< Agilent Pulse Generators

Agilent 81130A
Pulse Data Generator, 400/660 MHz and 1.32 Gb/s

Advanced delay and width accuracy over the 81110A due to it's PLL oscillator (not triggerable)
Large segmentable 64 kbit memory
Counted loop
Sequenced PRBS
Flexibility for serial data requirements such as data communication messages and initialization routines
Dual channels can be EXORed, i.e. added internally
Four combined independent timing eyes which allow pulses with almost arbitrary shapes in a single signal
400/660 MHz single- or dual-channel pulse data generator
400 MHz, 3.8 V, 50 Ω into 50 Ω (81131A) OR
660 MHz, 2.5 V, 50 Ω into 50 Ω (81132A)
Pulse, burst, pattern modes selectable
Precision timing model and sequenced PRBS capability
EXOR channel addition
SMA(f) 3.5 mm : Differential

Agilent 81130A Shown

Product Information
Datasheet	309 KB
Ordering Info
PDF Help

The Agilent 81130A with one or two Agilent 81131A output modules is a 400 MHz precision single/dual-channel Pulse Data Generator. With one or two or Agilent 81132A output modules, the Agilent 81130A even becomes a precision 600 MHz/1.32 Gbps single/dual-channel Pulse Date Generator.

Depending on the output module type, the pulse transitions are selectable (800 ps or 1.6 ns, 81131A) or fixed at 500 ps (81132A). The source impedance is 50 Ohm, the output voltage into 50 Ohm is up to 3.8 Vpp (81131A) and 2.5 Vpp (81132A) respectively.

Note: Each Agilent 81130A 400 MHz single-/dual-channel Pulse Pattern Generator requires one/two of the output channels Agilent 81131A (400 MHz, 3.8 V, 50 Ohm into 50 Ohm).

Each Agilent 81130A 660 MHz single-/dual-channel Pulse Pattern Generator requires one/two of the output channels Agilent 81132A (660 MHz, 2.5 V, 50 Ohm into 50 Ohm).

the 81130, 81131A and 81132A output channels can not be combined in one and the same 81130A!

Ordering Information
Model	Description	Buy Online	Price
81130A	Agilent 81130A Pulse Data Generator, 400/660 MHz and 1.32 Gb/s		$13,293.00
Required Modules
81131A	Agilent 81131A 400 MHz Output Channel for 81130A		$3,776.00
81132A	Agilent 81132A 660 MHz Output Channel for 81130A		$4,975.00
Options
Note: Any internal options must be ordered along with the main unit at time of purchase.
81130A0BW	Agilent 81130A-0BW: Add Service Documentation		$111.00
81130A1CM	Agilent 81130A-1CM: Add Rackmount Kit		$42.72
81130A1CN	Agilent 81130A-1CN: Add Handle Kit		$63.56
81130A1CP	Agilent 81130A-1CP: Add Rackmount and Handle Kit		$101.00
81130A1CR	Agilent 81130A-1CR: Add Rack Slide Kit		$144.00
81130ANOC	Agilent 81130A-NOC: Add "No Output Channel" Option		$329.00
81130AUFJ	Agilent 81130A-UFJ: Add 1 MB SRAM Memory Card		$175.00
81130AUK6	Agilent 81130A-UK6: Add Commercial Calibration option with Data		$245.00
Included Accessories
	(1) Users Manual (1) Output module		Included

Agilent 81130A Pulse Data Generator, 400/660 MHz and 1.32 Gb/s

Agilent 81130A
Pulse Data Generator, 400/660 MHz and 1.32 Gb/s