- Real-Time Measurement of RF emissions from Drones, UAVs, Radar
- Drone detection software
- Identifies drone type
- Frequency range from 9 kHz to 20 GHz, captures Drones of any kind
- 24/7 monitoring and recording without any gaps
- Unlimited in size and numbers of receivers, arbitrarily scalable and expandable
- Real-time remote control via Ethernet /LAN
- Works at night, in fog, and in bad weather
- High tracking accuracy
- Possibility to track the operator who controls the drone
- 360 degree coverage
- Weather- and splash-water resistant
- Works against drones disguised between buildings, industrial plants, and trees
- Includes Model IsoLOG 3D 80-UWB
- Automotive and chemical industry
- Nuclear Power stations
- Public facilities
- Security firms
- Individuals interested in protecting their private property
The Aaronia DDSRFComm Aartos Drone Detection System with RF Command Center and Isolog 80-UWB is used to detect the incursion of unwanted drones, based on the directional real-time measurement of the electromagnetic emissions of the drone and its remote control. It warns the operator when drones are in the area and send alerts. The system can detect several drones at once, including the same as well as different models.
The rapid proliferation of micro/mini UAVs is a growing potential threat to national and commercial security. Easy to produce, cheap to buy, simple to fly, and hard to detect, commercially and non-commercially available drones are one of the most quickly evolving technological threats to military and civilian interests. The drone detection system can be used virtually anywhere. Typical use scenarios are the protection of residential areas, governmental buildings and commercial / industrial areas like nuclear plants.
The Spectran V5 Command Center is built with powerful hardware. Three Full-HD monitors offer enough space to display all the information the RTSA Suite Software can show at the same time.
The DDS RF Comm is based on the Aaronia IsoLOG 3D antenna, a real-time Spectrum Analyzer and a special software plugin for the RTSA Suite software. All parts combined allow 24/7 monitoring and recording with a gapless data-streaming. Switch between a 24/7 recording mode and a Smart-Event-Recording-Mode.The system saves considerable measurement time and is compact and flexible. Each Sector/Antenna gets its own real-time view and is based on RF and µW detection. All views are combined to a 360° view. This gives full control over any RF emissions happening around. The system can provide an optical or audio alert if critical values are exceeded. Collect data and compare them to find out irregularities.
The DDS RF Comm system has no limitation in detection range, usually the detection range is at least the same as the usable distance from the operator to the drone, so it always depends on the transmitter power of the drone/operator. Depending on the drone type, it could be several miles without problems.
The AARTOS Drone Detector gives an alarm as soon as a remote control is on air, so even before the drone is in the air. Countermeasures can therefore be initiated at an early stage. The RF detection of the drone signals has advantages compared to other methods such as radar, optical and acoustic detection: Safe detection without false alarms: the system can not be irritated by other flying objects such as birds or balloons. The installed "Teach-In-Function" can teach the Aaronia DDS which drones are friendly. Early detection: The AARTOS DDS gives an alarm as soon as a remote control is turned on. Optical, acoustic and radar based drone detection solutions are not able to perform this kind of early-warning detection. Since the Aaronia AARTOS DDS detects both the drone via its downlink signals as well as the remote control, the direction of both can be tracked immediately.
|1-M CABLE||Aaronia 1-M CABLE 1M Low-Loss SMA Cable||
|5-M CABLE||Aaronia 5-M CABLE 5M Low-Loss SMA Cable||
|10-M CABLE||Aaronia 10-M CABLE 10M Low-Loss SMA Cable||
|AA20ATTN||Aaronia AA20ATTN 20dB SMA Attenuator||
|Data Sheet:||1.38 MB|