| << Aaronia EMC EMI Antennas
|
Aaronia HyperLOG 7060
700MHz to 6GHz High-Performance EMC Antenna
|
| |
- Frequency range: 700MHz-6GHz
- Max. transmission power: 100W CW (400 MHz)
- Nominal impedance: 50 Ohms
- Only a single broadband antenna for the complete frequency range
up to 6GHz
- Optimal for usage with spectrum analyzers for EMC measurement
- Incl. high-tech radom with modern, appealing design
- Freely alignable polarization
- Calibration data can be saved to an IC on the antenna and also
be read back
- Excellent forward/backward ratio
- Excellent symmetry of radiation patterns
- Integrated 5/8" tripod socket
- Suitable for mobile use
- Suitable for outdoor installation
- Directional
- Robust design
- Splash water proof
|
 
Aaronia HyperLOG 7060
Shown |
|
|
|
|
Most of the professional broadband
antennas available on the market today just have one disadvantage: They
are extremely expensive.
In contrast, Aaronia offers a very cost-effective alternative with their
HyperLOG 7000 series, still meeting even the highest expectations. They
offer an exceptional mix of performance, functionality and design
formerly unknown in this price category. Together with the HyperLOG®
antennas, any regular spectrum analyzer instantly becomes a professional
RF measurement device with directional characteristics. Hence, a true
dream team for EMC measurement in the laboratory or for outdoor use.
Due to their small weight and the multi-functional handle, these
antennas are the optimal supplement for portable EMC measurement devices
for locating and evaluating any kind of signal source.
Due to their flexibility in polarization, HyperLOG antennas can also be
used as handy WLAN or Wifi antennas. Point-to-point WLAN links or
networks can be constructed easily using the full bandwidth up to 6GHz,
achieving high throughput. Optimal for MMDS, ISM, CCTV and
data/telephony transmission. |
|
| |
EMC antennas from Aaronia Hyperlog7060 AG are totally different to the regular
antennas available on the market:
Many commercially available antennas are based on PCBs and other
unprofessional designs and do not really represent professional
measurement technology. In addition to the simple technical
construction, one more important omission is very common: these antennas
come "naked", without Radom frame, as a raw PCB (particularly included
with cheap broadband measurement devices). Due to this construction,
inaccurate measurements and invisible damage caused by environmental
influence (oxidation, fissures, etc.) can occur.
In contrast, Aaronia Hyperlog-7060 antennas come standard with a specially
constructed, high tech Radom housing. This housing has been constructed
after intense research with the most modern computer technology in such
a way that its shape, material and special coating have virtually no
influence on measurements, not even in case of dew or other kinds of
humidity collecting on the surface. Another important factor for Aaronia
Hyperlog 7060
was the development of a Radom with the lowest possible damping factor
achievable. The Aaronia Hyperlog:7025's designers created an antenna which has the best
possible protection against mechanical stress and environmental
influence without sacrificing any of its performance.
A further distinctive feature of the HyperLOG's Radom is the integrated
5/8" screw thread for accepting the included (directional measuring)
handle. As it conforms to the standard due to its size of 5/8", the
antenna could also be mounted to any other suitable tripod. Hence,
polarization and bearing of the antenna can be adjusted optimally and
reliably.
Inside the Radom, the user can find the sophisticated antenna itself, covered
with a highly conductive gold coating. This high-grade coating and the
antenna's special design warrant excellent linearity over the entire
frequency range, and an exceptional receiving or transmitting
performance. It is even possible to permanently store calibration data in a
special IC on the antenna. These can later be recalled for dynamic
antenna adjustment, for example, with an Aaronia spectrum analyzer. |
| |
| Specifications |
| Functions |
Details |
| Design: |
Logarithmic-period |
| Frequency range: |
700MHz-6GHz |
| Max. transmission power: |
100W CW (400 MHz) |
| Nominal impedance: |
50 Ohms |
| VSWR (typ.): |
<1:2 |
| Gain (typ.): |
5dBi |
| Antenna factor: |
23-38dB/m |
| Return loss: |
Better than -10dB |
| Calibration points: |
333 (10MHz steps) |
| RF connection: |
SMA socket (18GHz) or N socket using an
adapter |
| Polarization: |
linear vertical/horizontal |
| Tripod connection: |
5/8" |
|
| |
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| 752AAR |
Aaronia 752 HyperLOG 7060 700MHz to 6GHz High-Performance EMC Antenna |
Please Call |
| 752TAAR |
Aaronia 752T HyperLOG 7060 700MHz to 6GHz High-Performance EMC Antenna, Transparent Case |
Please Call |
| Included accessories |
| |
- 1 - Detachable Multi-functional Handle w/ "Miniature-Tripod" Mode,
- 1 - SMA toolset with over-torque protection
- 1 - Sturdy aluminum-design carrying case w/ custom padding
|
Included |
| Optional accessories |
| 243AAR |
Aaronia 243 Heavy Plastic Carrying Case PRO |
Please Call |
| 770AAR |
Aaronia 770 SMA to N Adapter (female/male; for devices that use N connectors) |
Please Call |
| 771AAR |
Aaronia 771 1m Male/Male SMA-Cable |
Please Call |
| 772AAR |
Aaronia 772 5M Male/Male Lowloss SMA-Cable |
Please Call |
| 773AAR |
Aaronia 773 10 Male/Male Lowloss SMA-Cable |
Please Call |
)
PDF Help