|
Kit Contents |
- Silicone insulated 4ft (1.2m) test leads with right-angle DMM plugs fit
meters from Fluke, Meterma (Wavetek), Greenlee, Amprobe and others
- Modular electronic test probes with stainless-steel tips
- Extended tip probe adapters
- Insulated spade lugs connect to test leads and can be secured to binding
posts or terminals
- Medium and Large alligator clips plug into the test leads
- Nylon storage pouch
|
- Silicone insulated 4ft (1.2m) test leads with right-angle DMM plugs for
most meters from Fluke, HP, Meterman, Amprobe, and others
- Modular probe set with 5 sets (10 total) of interchangeable replacement
tips
- New retractable tip probe with 3in (76.2mm) long tip and silicone leads
- Test lead coupler connects leads to probe set for 16ft (4.8m) reach
- Medium alligator clip set
- Large alligator clip set
- Spade lugs
- IC probe tip adapter
- Minigrabber and Minipincer test clip leads attach to test leads
- Nylon storage pouch with compartments for accessories
|
- 2 BNC (F) to Double Banana
Plug Adapters
- 2 BNC (M) to Double Banana
Plug Adapters
- 2 BNC (F) to Binding Posts
Adapters
- 2 BNC (M) to Binding Posts
Adapters
- 2 Single Black Alligator Clip
to Banana Jack Adapters
- 2 Single Red Alligator Clip
to Banana Jack Adapters
- 2 Single Black Banana Jack to
Pin Tip Adapters
- 2 Single Red Banana Jack to
Pin Tip Adapters
- Double Banana Plug Shorting
Bar, Insulated
- 2 Banana Plug Patch Cord
(Black, 36in)
- 2 Banana Plug Patch Cord
(Red, 36in)
- 2 Banana Plug Patch Cord
(Black, 12in)
- 2 Banana Plug Patch Cord
(Red, 12in)
- 2 Banana Plug Patch Cord
(Black, 24in)
- 2 Banana Plug Patch Cord
(Red, 24in)
- 2 Double Banana Patch Cord,
Shielded Line
- 2 Microvolt Spade Lug,
Shielded
- 4 BNC (M), RG58C/U Shielded
Coaxial Cables
- BNC (F) to Microbgrabber Test
Clips
- (F) to Microbgrabber Test
Clips
- 2 BNC (F-F) Adapter
- 2 BNC T, Recep-Plug-Recep
Adapter
- 2 BNC(F) / N(M) Adapter
- Test Lead Holder for Wires up
to .320in Dia.
- Large Test Companion Carrying
Case
- Plastic Storage Tray
|
