PMK PML Series Low-Z Microline Passive Probes to 1.5 GHz

Small Size Ø 2.5 mm at Probe Tip
New IC Contacting System for 0.5 to 1.27 mm pitch
Interchangeable Spring Contact Tip
Coaxial Design
Low Input Capacitance

PMK PML 711A Shown

The PML Passive probe family sets new standards in "High performance" probing up to 1.5 GHz system bandwidth. The compact design with only 2.5mm housing diameter at the prove tip is ideal for measurements of SMT components. It provides a much better visibility over the device under test as conventional 5mm probe housing designs. A true PMK GmbH feature the exchangeable probe tip is also available for the PML series. The gold plated spring contact or the rigid tip are 0.5mm in diameter. The tip replacement is easy and gives the engineer the best choice.

These great advantages and over 30 accessories parts for the new PML probe series will offer various configuration to solve most adaptation desires.

Low Input Capacitance
The standard PML +10 model with an input capacitance less than 9.5 pF is most appropriate for measurements of HF signals where a too high load of the measuring point can falsify the result and with particularly sensitive SMT elements it can results and "Over load".

The model +20 was designed to reduce the input capacity of the measuring system (oscilloscope and probe) to less than 5.6 pF. This is particularly interesting for applications where the cost of any active probe system is exceeding the usage, but a sufficient high output amplitude for a 20:1 divider is available.

In this case the resolution is not too narrow and the measurement does not go under into noise.

Type	Part #	Ratio	Attenuation	Probe Bandwidth	Cable Length	Buy Now	Price
2.5mm Microline Series
PML711A	855-711-A00	x10	10:1	500 MHz	1.3m		$170.50
PML711ARO	855-711-A01	x10	10:1	500 MHz	1.3m w/ Readout		$181.50
PML711B	855-711-B00	x10	10:1	500 MHz	1.3m		$170.50
PML711BRO	855-711-B01	x10	10:1	500 MHz	1.3m w/ Readout		$181.50
2.5mm Microline Low-Z Series
PML751	875-751-000	x10	10:1	1.5 GHz	1.3m		$234.74
PML751RO	875-751-001	x10	10:1	1.5 GHz	1.3m w/ Readout		$255.67
PML791	875-791-000	x100	100:1	1.5 GHz	1.3m		$195.50
PML791RO	875-791-002	x100	100:1	1.5 GHz	1.3m w/ Readout		$210.50
Included Accessories
	2 - Spring Contact Tips 0.5 mm (1 mounted in the Probe, 1 in the accessory) 1 - 1 BNC-Adapter 1 - 1 Insulating Cap yellow 1 - 1 Ground Lead 11 cm (4") 1 - 1 Trimmer Tool 1 - 1 Ground Spring "dogleg" PCB adapter for mounting on the PCB board					Included

Compatible Systems
PMK Probe	Company	Can Replace:	Used for:
PML 711A RO	Aglient/HP	1160A 1.5m Miniature Passive Probe, 10:1, 10 MOhm	-
		1161A 1.5m Miniature Passive Probe, 10:1, 10 MOhm
	LeCroy	PP005A 500 MHz, 500 V Passive Probe, 5 mm Dia.	9300 Series, LC Series, WavePro 900 & 7000 Series
		PP007-WR-1 500 MHz, 400V Passive Probe, 2.5 mm Dia.	WaveRunner 6000A, Xi (1 GHz–2 GHz), Xs (1 GHz) series,
		PP0011 500 MHz, 400 V Passive Probe, 5 mm Dia.
PML 711B RO	LeCroy	PP007-WS 500 MHz, 400V Passive Probe, 2.5 mm Dia.	WaveSurfer 400 Series
		PP008 500 MHz, 400V Passive Probe, 2.5 mm Dia.	WaveSurfer 400, Xi (≤600 MHz), Xs Series (≤600 MHz) series
		PP009 500 MHz, 400V Passive Probe, 5 mm Dia.