| Specifications AEMC MTX162 |
| Interface |
| Screen Specifications |
Color PC screen (min. resolution: 1024 x 768) |
| Display Mode |
8 x 10 div.- Multi-windowing (control panel, trace, zoom, FFT, etc.) |
| No of Traces on Screen |
Four traces and four references |
| Screen Control |
"Windows-like" and online help – all commands available via mouse |
| Vertical |
| Vertical Sensitivity |
5mV to 100V/div |
| Bandwidth |
60MHz (bandwidth limiter: 15MHz, 1.5MHz or 5kHz) |
| Channels |
2 channels, class 1, common ground |
| Horizontal |
| Time Base Speed |
32 ranges from 5ns to 100s/div |
| Trigger |
| Mode |
Auto, Triggered, One-shot ROLL, auto-level at 50% |
| Source |
CH1, CH2, Mains |
| Type |
Rising or falling edge, adjustable pretriggering from 0 to 100% |
| Digital Memory |
| Max. Sampling Speed |
Repetitive = 20GS/s One-shot = 50MS/s |
| Vertical Resolution |
8 bits |
| Memory Capacity |
Depth = 50,000 points – storage capacity depends on PC configuration used |
| SPO (Smart Persistence Oscilloscope) |
| Duration of Persistence |
Analog remanent mode |
| Measurement Processing |
| FT Analyzer/Math Functions |
FT, +, –, x, / |
| Manual Cursors |
dv, dt, 1/dt, phase – cursors linked or unlinked to trace |
| Automatic Measurement |
2 or 19 measurements out of 19 + automatic phase On-any type of curve Markers and limits |
| Recorder Mode |
| Duration/Sampling |
Dedicated ROLL mode from 2s to 33min |
| Harmonic Analyzer |
| Analysis Range |
Fundamental from 40Hz to 1kHz + 31 orders on 1 to 2 channels |
| Processing |
Total RMS value, THD and selected order (%F, phase , frequency, VRMS) |
)
PDF Help