Phone 800-517-8431

AEMC 3640 KIT-300FT

300 ft. 3-Point Digital Ground Resistance Tester Kit

Brand: AEMC
Model No: 3640 KIT-300FT
MPN: 2135.14
Our Model No: 3640KIT300FT
Condition: NEW
PDF Document Icon Data Sheet (932 KB)
3640 KIT-300FT
Sale $1,234.05

Product Features:

  • Fall-of-potential method
  • Measures ground resistance (2- and 3-point)
  • Autoranging: automatically selects the optimum range
  • Designed to reject high levels of noise and interference
  • Extremely simple to operate: connect - press - read
  • LED on faceplate informs operator of high input noise, high auxiliary rod resistance and fault connections
  • Battery powered
  • Rugged dustproof and rainproof field case
  • Color-coded terminals
  • May be used for continuity tests on bonding


  • Three-point measurements for measuring resistance to ground of ground rods and grids. three-point measurements are generally used when the electrode or grid is easily disconnected, if corrosion is suspected, or where ground faults are unlikely to occur.
  • Two-point tests for continuity on bonding or on pre-established grounds. This test is commonly performed in urban environments where proper auxiliary electrode placement my be obscured by confined real estate. Measurements are referenced against a good local ground conductor.

The AEMC 3640 KIT-300FT 3640 300 ft. 3-Point Ground Resistance Tester Kit is a rugged, easy-to-use instrument ideal for maintenance crews performing numerous tests. The Model 3640 is designed to reject high levels of interference. It can be used under difficult conditions such as high stray currents that normally affect accuracy.

The Model 3640 Kit - 300 ft. is in complete kit form, which includes instrument, two 300 ft color-coded leads on spools (red and blue), two 100 ft color-coded leads (green and black), four 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100 ft tape measurer and carrying bag.

  • 1 - 9V Battery
  • 1 - Soft Carrying Case
  • 1 - Instruction Manual
  • 1 - 3-Point Ground Resistance Tester
  • 2 - 300 ft color-coded leads on spools (red and blue)
  • 2 - Color-coded leads (green and black)
  • 4 - 14.5" T-shaped auxiliary ground electrodes
  • 1 - Set of five spaded lugs
  • 1 - 100 ft tape measurer
Data Sheet: PDF Document Icon (932 KB)
↑ Back to Top